Pro-form PFMC8992 Bruksanvisning
Pro-form
Pulsmätare
PFMC8992
Läs nedan 📖 manual på svenska för Pro-form PFMC8992 (12 sidor) i kategorin Pulsmätare. Denna guide var användbar för 14 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
Heart Rate Monitor User’s Guide Model No. PFMC89820
Model No. PFMC89920
Congratulations for purchasing the new AccuRate™
heart rate monitor. To install and use the heart rate
monitor, read and follow all instructions in this
user’s guide. For detailed instructions about using
the heart rate monitor with your exercise equipment,
refer to the user’s manual included with your exercise
equipment.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following conditions: (1)
this device may not cause harmful interference, and
(2) this device must accept any interference re-
ceived, including interference that may cause unde-
sired operation. Changes or modifications not ex-
pressly approved by ICON Health & Fitness, Inc.
could void the user’s authority to operate this device.
WARNING
If you have an implanted medical device such
as a pacemaker, check with your physician be-
fore using the heart rate monitor.
If you have heart problems, or if you are over 60
years of age and have been inactive, do not use
pulse-driven programs.
If you are taking medication regularly, consult
your physician to find whether the medication
will affect your exercise heart rate.
2
How to Install the Receiver
Before the heart rate monitor can be used, the included receiver must be installed.
To install the receiver in an exercise cycle or an elliptical crosstrainer, refer to the instructions in your exer-
cise cycle user’s manual or elliptical crosstrainer user’s manual. After you have installed the receiver, refer to
pages 10 and 11 of this user’s guide. Note: If you have lost your user’s manual, go to www.iconservice.com on
the World Wide Web, or call toll-free 1-800-999-3756.
To install the receiver in a treadmill, refer to the instructions in your treadmill user’s manual. After you have in-
stalled the receiver, refer to pages 10 and 11 of this user’s guide. Note: If you have lost your user’s manual, go to
www.iconservice.com on the World Wide Web, or call toll-free 1-800-999-3756. If your treadmill user’s manual
does not include instructions for installing the receiver, refer to pages 2 through 9 of this user’s manual.
Pages 2 through 9 include 11 different sections that show how the receiver should be installed in different styles
of treadmills. Find the drawings that most closely resemble your treadmill, and follow the instructions in that sec-
tion to install the receiver. Note: Your treadmill may not look exactly like the treadmills shown in the drawings. If
you have questions, call toll-free 1-800-999-3756.
1. Make sure that the power cord is unplugged. Remove
the indicated Screws from the Console Back (A).
Important: The Screws may be different lengths. Keep
track of which Screws were removed from which holes.
2. Peel the paper off the pad on the bottom of the Receiver
(B). Turn the Receiver so the cylinder is on the side
shown, and press the Receiver into the bottom of the
Console Base (C) in the indicated location.
A
C
Screws
1
2C
B
Cylinder
3. Connect the included Short Jumper Wire (D) to the wire
on the Receiver (B). Connect the other end of the Short
Jumper Wire to the PULSE 2 or PLS2 jack on the back of
the Console (C). If there is a wire already plugged into
the PULSE 2 jack, unplug it. Note: The other wires in-
cluded with the receiver may be discarded. The Wire Tie
can be used to tie wires, if needed.
Make sure that no wires are pinched. See step 1.
Reattach the Console (C) with the Screws. Important: If
the Screws are not put back into the same holes from
which they were removed, the Console will be dam-
aged.
C
PLS2
Jack
PULSE 2
Jack
3
DB
3
1. Make sure that the power cord is unplugged. Remove
the indicated Screws (A) from the Console Back (B).
2. Peel the paper off the pad on the bottom of the Receiver
(C). Turn the Receiver so the cylinder is on the side
shown, and press the Receiver into the bottom of the
Console Back (B) in the indicated location.
Connect the included Short Jumper Wire (D) to the wire on
the Receiver (C). Connect the other end of the Short
Jumper Wire to the PULSE jack on the back of the Console
(E). Note: The other wires included with the receiver may
be discarded. The Wire Tie can be used to tie wires, if
needed.
Make sure that no wires are pinched. See step 1.
Reattach the Console (E) with the Screws (A).
B
E
A
1
2
PULSE
Jack
D
E
C
B
Cylinder
Produktspecifikationer
| Varumärke: | Pro-form |
| Kategori: | Pulsmätare |
| Modell: | PFMC8992 |
Behöver du hjälp?
Om du behöver hjälp med Pro-form PFMC8992 ställ en fråga nedan och andra användare kommer att svara dig
Pulsmätare Pro-form Manualer
7 September 2024
30 Augusti 2024
25 Augusti 2024
20 Augusti 2024
Pulsmätare Manualer
- Pulsmätare Braun
- Pulsmätare Garmin
- Pulsmätare Suunto
- Pulsmätare Pyle
- Pulsmätare Beurer
- Pulsmätare Timex
- Pulsmätare Lanaform
- Pulsmätare Medisana
- Pulsmätare Omron
- Pulsmätare Terraillon
- Pulsmätare Bowflex
- Pulsmätare Polar
- Pulsmätare Magellan
- Pulsmätare Domyos
- Pulsmätare Mio
- Pulsmätare Rossmax
- Pulsmätare Sigma
- Pulsmätare Runtastic
- Pulsmätare Lezyne
- Pulsmätare Wahoo Fitness
- Pulsmätare Echowell
- Pulsmätare Dexford
- Pulsmätare CicloSport
- Pulsmätare Oregon Scientific
- Pulsmätare BBB Cycling
- Pulsmätare Fusion Sport
- Pulsmätare Ciclo
Nyaste Pulsmätare Manualer
24 Oktober 2024
19 Oktober 2024
6 Oktober 2024
23 September 2024
23 September 2024
21 September 2024
19 September 2024
18 September 2024
16 September 2024
15 September 2024