Roland SYS-500CS Bruksanvisning
Roland
Synthesizer
SYS-500CS
Läs nedan 📖 manual på svenska för Roland SYS-500CS (1 sidor) i kategorin Synthesizer. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/1
English
Owner’s Manual
Before using this unit, carefully read leaet “USING THE UNIT SAFELY.”
Copyright © 2015 ROLAND CORPORATION
Model SYS-512 SYS-521 SYS-530 SYS-540 SYS-572
Current Draw 70 mA (+12 V)
55 mA (-12 V)
40 mA (+12 V)
40 mA (-12 V)
50 mA (+12 V)
35 mA (-12 V)
85 mA (+12 V)
50 mA (-12 V)
110 mA (+12 V)
90 mA (-12 V)
Power Supply Eurorack power
Dimensions 80.8 (W) × 128.5 (D) × 57.2 (H) mm
3-3/16 (W) x 5-1/16 (D) x 2-1/4 (H) inches
Weight 212 g 203 g 194 g 202 g 213 g
8 oz 8 oz 7 oz 8 oz 8 oz
Accessories Owner’s Manual, Leaet “USING THE UNIT SAFELY,” Installation screws (4 pcs.), Eurorack power cable
In the interest of product improvement, the specications and/or appearance of this unit are subject to change without prior notice.
Main Specications Roland SYSTEM-500 (SYS-512, SYS-521, SYS-530, SYS-540, SYS-572) : Eurorack Modular
The documentation for this unit consists of the following materials.
5USING THE UNIT SAFELY (separate leaet)
Read this rst. It contains notes that you must observe in order to use the unit correctly.
5Owner’s Manual (this document)
This explains how to make connections, and describes the specications of the unit.
5Parameter Guide (English PDF)
This explains the various parts of the unit. Download it as described at right.
About the Manuals
CV stands for “Control Voltage,” an electrical signal (control voltage) that modies
the behavior of an analog synth or Eurorack module. GATE is a trigger signal that
controls the beginning and end of an envelope or other control voltage.
CV / GATE Input
Use the included screws (4 pcs.) to attach the unit to your Eurorack case at the
locations indicated.
CAUTION
7Keep small items out of the reach of
children
To prevent accidental ingestion
of the parts listed below, always
keep them out of the reach of small
children.
5Included Parts: Eurorack installation screws
Installing in a Eurorack Case
By using the included Eurorack power cable, you can operate this unit on the
Eurorack’s system power supply (+12 V).
1. Grasp the 16-pin connector of the Eurorack power cable, and insert it into
the Eurorack’s power connector so that the red wire is aligned with the -12
V pin.
2. Grasp the 10-pin connector of the Eurorack
power cable, and insert it into the unit’s
power connector so that the red wire is
aligned with the white line on the unit.
RED SIDE
RED SIDE
WHITE LINE
WARNING
7Electrocution hazard
* Always turn the Eurorack unit o and unplug the power cord
before plugging the Eurorack power cable.
* Do not touch the electrical terminals when attaching the Eurorack power
cable.
Using a Eurorack Power Cable
Obtaining the owner’s manual (PDF version)
1. Enter the following URL on your computer.
http://www.roland.com/manuals/
2. Select the name of your product.
* 5 1 0 0 0 4 7 2 8 8 - 0 1 *
Produktspecifikationer
| Varumärke: | Roland |
| Kategori: | Synthesizer |
| Modell: | SYS-500CS |
Behöver du hjälp?
Om du behöver hjälp med Roland SYS-500CS ställ en fråga nedan och andra användare kommer att svara dig
Synthesizer Roland Manualer
12 Oktober 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
16 September 2024
14 September 2024
12 September 2024
11 September 2024
10 September 2024
Synthesizer Manualer
- Synthesizer Casio
- Synthesizer Yamaha
- Synthesizer Arturia
- Synthesizer Suzuki
- Synthesizer Korg
- Synthesizer Boss
- Synthesizer Behringer
- Synthesizer Make Noise
- Synthesizer Moog
- Synthesizer Sequential
- Synthesizer Soma
- Synthesizer Novation
- Synthesizer Dreadbox
- Synthesizer Sonicware
- Synthesizer Flame
- Synthesizer MFB
- Synthesizer Waldorf
- Synthesizer (Recovery)
- Synthesizer Future Retro
- Synthesizer ELTA Music
- Synthesizer LennarDigital
Nyaste Synthesizer Manualer
26 Oktober 2024
22 Oktober 2024
21 Oktober 2024
19 Oktober 2024
12 Oktober 2024
5 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024