Scott LSX 10 Bruksanvisning

Scott Vagga/dockningsstation LSX 10

Läs nedan 📖 manual på svenska för Scott LSX 10 (4 sidor) i kategorin Vagga/dockningsstation. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

MODEL NO.: LSX 10

WIRELESS LED LIGHT WITH SPEAKER

Instruction Manual

GB-1

PRECAUTIONS

Follow the instructions below to ensure the product is used safely and correctly.

PLACEMENT

. Do not use the unit in places which are extremely hot, cold, dusty, or humid.

. Do not restrict the airflow around the unit by placing it in a place with poor ventilation.

. Do not place the unit close to heat sources.

. Use the apparatus only in moderate climates.

. Do not expose the unit to rain or splash with water.

. Do not place objects filled with liquids, such as vases on the unit.

AC VOLTAGE

. Before use, check that the rated voltage of your unit matches your local voltage.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with an

arrowhead symbol within

a triangle is a warning

sign alerting the user to

the presence of

“dangerous voltage”

inside the unit.

ATTENTION: To reduce the

risk of electric shock, do not

remove the cover. There are no

user serviceable parts inside

the unit. Refer all servicing to

qualified personnel.

The exclamation mark

within a triangle is a

warning sign alerting the

user to the presence of

important instructions

accompanying the

product.

Congratulations on your purchase of this additional wireless light with loud

speaker that we hope will fully meet your requirements. It will allow you to

improve iDXS 10L / iXSW 50 system.

TABLE OF CONTENTS

PRECAUTIONS 1

TABLE OF CONTENTS 1

BOX CONTENTS 2

LOCATION OF CONTROLS 2

POWER SUPPLY AND INSTALLATION 2

BASIC OPERATION 2

MAINTENANCE 3

TROUBLESHOOTING GUIDE 3

TECHNICAL SPECIFICATIONS 3

GB-2

BOX CONTENTS

1. LED Light with speaker

2. Pin for pairing 3. Instruction manual

LOCATION OF CONTROLS

LED light with speaker

1. E27 screw

2. LED light

3. Pair button

4. Standby LED

5. Speaker

POWER SUPPLY AND INSTALLATION

LED light with speaker

Make sure the power source is switched off before installation.

Screw the LED light with speaker to an E27 socket with an AC 100-240V ~

50/60Hz power source.

Note: Do not use your external dimmer control that may cause the unit

malfunction. To dim the light, press the button repeatedly.

BASIC OPERATION

Note: This LED light with speaker must be used with the docking station -

SCOTT model no.: iDXS 10L or iXSW 50. Refer to the instruction manual of

the docking station for detail operation.

Standby/On mode

Device Standby On

LED light with

speaker

Standby LED:

LED light: On

Off Off

PAIRING

Note: Make sure that the LED light with speaker is powered properly. Refer to the

manual of your iDXS 10 L or iXSW 50 system for more information about pairing.

Pairing is to ensure your LED light with speaker can receive RF transmission

correctly from the docking station.

1. If you want to pair this new light in an existing group (one station + 2 lights to

get stereo sound), you have to reset the pairing first: when the docking station

is in standby mode, use the piece (supplied) to press and hold the PAIR button

of the docking station for more than 10 seconds until the source LEDS at the

top of the docking station flash. The station then goes back to standby mode.

2. Press the PAIR buttons briefly at the bottom of the docking station first and

then the other devices within one minute. All the standby LEDs will blink rapidly

until the pairing is successful in about one minute and the source LEDS at the

top of the docking station will flash for few seconds.

3. For pairing the next group, repeat above step (2).

Produktspecifikationer

Varumärke:	Scott
Kategori:	Vagga/dockningsstation
Modell:	LSX 10
Färg på produkten:	Zwart
Bredd:	465.07 mm
Djup:	327.15 mm
Höjd:	647.95 mm
Justerbar i höjdled:	Ja
Maximal viktkapacitet:	6.8 kg
Certifiering:	TAA
Antal per paket:	1 stuk(s)
Kompatibilitet:	Chief's 200mm x 200mm and 14" x 14" Q-latch mounting systems
Typ produkt:	Plank
Harmoniserad systemkod (HS):	85299097
Höjdjusteringsområde:	396 - 445 mm
Justerbart djup:	Ja