Technoline WS 6810 Bruksanvisning
Technoline
Väderstation
WS 6810
Läs nedan 📖 manual på svenska för Technoline WS 6810 (1 sidor) i kategorin Väderstation. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/1
SNOOZE
Outdoor Remote
Temperature
Sensor
Battery
Door
E0060
-
E
Instruction Manual
Radio Controlled
LED
Clock with Wireless Indoor
and Outdoor Temperature
I n s e r tt
AC/DC
adaptor plug
Indoor Temperature
HI
-
L0
dimmers
witch
Outdoor
Temperature
\
Insert
3
X
AAA
back up
batteries
lnstallation
Plug the AC/DC adaptor into any 230V European AC household outlet.
Plug the DC jack into the the back of clock. The front of the clock will show
.
Battery Back Up
1.
Slide the battery door at the back case, insert 3 x
AAA
batteries with correct
+
and
-
polarity signs inside the battery compartment.
Replace the battery cover.
2.
When AC power is
off,
the batteries will power the clock to keep track of the time and alarm time.
3.
When only the back
-
up batteries is used, the LED panel is off.
Power Up Reception and Signal Strength Display
1.
Afterplug in AC power, the clock starts to receive DCF signal. lcon
blinks. Display shows
.
2.
When strong DCF signal is detected, display shows with
3
bars
When weak or no DCF signal is detected, display shows with 1
bar
or
.
You will need to place the dock to another area for
better reception, or unplug the AC/DC jack to start over reception again
During reception, the signal strength may move from
1
bar to
2
bars to
3
bars. This is normal since the clock
is detecting DCF signal and other
signals in the air at the same time.
3. If the clock does not catch DCF time signal for
7
minutes, it will go
back to normal time display
.
4.
During reception, press TlME button once will go to normal time display. Press
HR again will return to reception mode and signal strength indication.
Successful reception or failed
reception
loon becomes static on (stop blinking) when reception is successful
loon disappears when reception is failed
Weak
or
no
RC
signa
Is
detected
Successful
Reception
Failed
Reception
Automatic Reception and Manual
Reception
2:00 am. If fails at 2:00 am, it will start again at 3:00 am.
Automatic reception
:
this clock starts reception automatically everyday at : 1:00am. If auto reception fails at 1:00 am, it will start again at
If auto reception fails at 3:00 am still fails,
it
will start reception every
3
hours until it succeed to catch correct DCF time.
Manual reception
:
press HR button once anytime to start manual reception of DCF time signal. The LED time display will go to radio
controlled reception mode
RC
tower
lcon blinking
Strong
DCF signal
detected
I
minute digits
may
start counting
01
02 0 3 60
00
01
02 trying
to
matchwith the correct seconds
of
JJY
signal
To Set
Time
and Alarm Time
After power up, if press TIME button once, time digits go to 0:00am default
start
-
up The clock time). continues to receive signal. The DCF icon is still blinking.
Press HR button once will go back to radio controlled reception mode (as above)
TO SET TlME
Press and hold TlME button and at same the time press HR button once at a time to
set
hour.
Press and hold TlME button and at same the time press MIN button once at a time to minute. set
TO SET ALARM
1
TlME
Slide the Alarm Switch to ALM 1
.
Press and hold ALM button and at the same time press HR button once at a time to set hour.
Press and hold ALM button and at the same time press MIN button once at a time to
set
minute.
TO
SET ALARM
2
TlME
Slide the Alarm Switch to ALM
2.
Press and hold ALM button and at the same time press HR button once at a time to set hour.
Press and hold ALM button and at the same time press MIN button once at a set time to minute.
TO TURN ON/OFF ALARM
1
or/and ALARM
2
To turn on Alarm
1
only, slide the alarm switch to ALM 1
,
ALM 1
LED lights up on upper left
of
the hour digits.
To turn on Alarm
2
only, slide the alarm switch to ALM
2,
ALM
2
LED lights up on lower left of the hour digits.
To turn on both Alarm
1
and
2,
slide the alarm switch to ALM 1
+
2,
both ALM
1
and ALM 2 LED light up.
To in
-
activate both Alarm 1
and
2
permanently, slide to ALM OFF. Both ALM
1
and ALM
2
LED turn off.
TO USE THE SNOOZE ALARM
When time reaches the set ALARM 1
and or /ALARM
2
time, the dock will beep with the ALM
1
andlor ALM
2
LED blinking.
Press the SNOOZE button once, the alarm sound will stop and ALM
1
or ALM
2
LED keep blinking. Alarm will sound again
in
5
minutes.
TO
STOP THE ALARM
When time reaches the set ALARM
1
andlor ALARM
2
time, the dock will beep with the ALM 1
and or /ALM
2
LED blinking.
Press and hold the SNOOZE button for
2
seconds, the alarm sound will stop ALM and 1
or ALM
2
LED becomes static.
Alarm
1
andlor Alarm 2 will sound again same time next day.
TO TURN OFF ALARM 1
AND/OR ALARM
2
PERMANENTLY
Slide the alarm switch to ALM OFF. Alarm sound will stop and both ALM
1
and ALM
2
LED'S turn off.
TO
SET SNOOZE DURATION (from
5
to
60
minutes)
Press and hold and time display SNOOZE will show
"
05
"
(default duration) and then snooze press MINUTE button to set your
desired snooze duration.
TO
READ MAXIMUM
-
MINUMUM INDOOR
-
OUTDOOR TEMPERATURES
Simply press the button to view the maximum indoor and outdoor temperatures. Press CLEAR to reset the Max readings.
The readout will now appear as
-
-
and will start to record the maximums again.
Then press the button to view the minimum indoor and outdoor temperatures. Press CLEAR reset the to Min readings.
The readout will now appear as
-
-
and will start to record the minimums again.
IF YOU LOSE THE OUTDOOR TEMPERATURE
When the outdoor temperature digits show
'---'l,
the wireless transmission is either interrupted or lost. Press the RESET button
located on the back of the outdoortransmitter. If you continue to lose outdoor temperature the display, try placing the transmitter in a different
location until you have smooth transmission
of
temperature data.
TROUBLE SHOOTING
Press the RESET button on the back of the base thermometer and then press RESET button located on the back of the outdoor transmitter.
Once you do this, your
clock
will be reset to default setting and needs to
be
up
-
dated by DCF time signal again.??
TO
USE THE HI
-
L0 DIMMER SWITCH
Simply slide the LO
-
HI DIMMER at switch the back of the clock to adjust the LED brightness to a level comfortable to you in the dark.
CARE OF YOUR CLOCK
1.
.
Do not expose your clock to extreme temperatures, water or direct sunlight.
2. Avoid contact with any corrosive materials
3.
Do not subject the clock to excessive force, dust humidity or
4.
Do not inner back case tamper open the or
with
any components of this dock
5.
Do not plug in any adaptor other AC/DC wi thincorrect specifications or voltage
Produktspecifikationer
| Varumärke: | Technoline |
| Kategori: | Väderstation |
| Modell: | WS 6810 |
Behöver du hjälp?
Om du behöver hjälp med Technoline WS 6810 ställ en fråga nedan och andra användare kommer att svara dig
Väderstation Technoline Manualer
15 September 2024
13 September 2024
10 September 2024
9 September 2024
1 September 2024
24 Augusti 2024
24 Augusti 2024
15 Augusti 2024
14 Augusti 2024
11 Augusti 2024
Väderstation Manualer
- Väderstation Braun
- Väderstation Daewoo
- Väderstation Honeywell
- Väderstation Ade
- Väderstation Alecto
- Väderstation Ascot
- Väderstation Lexibook
- Väderstation Nedis
- Väderstation Thomson
- Väderstation Pyle
- Väderstation Taylor
- Väderstation Livoo
- Väderstation OBH Nordica
- Väderstation Hyundai
- Väderstation Renkforce
- Väderstation ECG
- Väderstation Clatronic
- Väderstation Lowrance
- Väderstation Sencor
- Väderstation Blaupunkt
- Väderstation Elro
- Väderstation EMOS
- Väderstation Extech
- Väderstation Denver
- Väderstation Hama
- Väderstation Cresta
- Väderstation Brigmton
- Väderstation Velleman
- Väderstation GlobalTronics
- Väderstation La Crosse Technology
- Väderstation GoGEN
- Väderstation Profile
- Väderstation AcuRite
- Väderstation Muse
- Väderstation Auriol
- Väderstation Ventus
- Väderstation Cotech
- Väderstation Davis
- Väderstation Netatmo
- Väderstation Bresser
- Väderstation TFA
- Väderstation Clas Ohlson
- Väderstation Goddess
- Väderstation Irox
- Väderstation Konig
- Väderstation Trevi
- Väderstation Orion
- Väderstation EVE
- Väderstation UPM
- Väderstation Fluke
- Väderstation Minox
- Väderstation Gira
- Väderstation Jung
- Väderstation Krontaler
- Väderstation Balance
- Väderstation Day
- Väderstation ELV
- Väderstation Dexford
- Väderstation EQ3
- Väderstation Saxon
- Väderstation IT
- Väderstation Garni
- Väderstation HomeMatic
- Väderstation Eurochron
- Väderstation La Crosse
- Väderstation Durabase
- Väderstation Meade
- Väderstation Brandson
- Väderstation Sempre
- Väderstation Levenhuk
- Väderstation Digi-tech
- Väderstation Oregon Scientific
- Väderstation Unitec
- Väderstation TFA Dostmann
- Väderstation Greisinger
- Väderstation Inovalley
- Väderstation Ease Electronicz
- Väderstation Rebel
- Väderstation Mebus
- Väderstation Saphir
- Väderstation Paget Trading
- Väderstation PeakTech
- Väderstation Chauvin Arnoux
- Väderstation Techno Line
- Väderstation ChiliTec
- Väderstation Global Water
- Väderstation Uzoli
- Väderstation Xeecom ApS
- Väderstation Marathon
- Väderstation Ea2 LABS
- Väderstation Hesdo
- Väderstation Weinberger
- Väderstation Majestic
- Väderstation EMOS SELECT
- Väderstation Prologue
- Väderstation Gewiss
- Väderstation National Geographic
- Väderstation Browin
- Väderstation ClimeMET
- Väderstation Thierry Mugler
- Väderstation Otio
- Väderstation Baldr
- Väderstation Setti+
- Väderstation Bearware
Nyaste Väderstation Manualer
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024