TP Link Archer C86 Bruksanvisning

TP Link Router Archer C86

Läs nedan 📖 manual på svenska för TP Link Archer C86 (4 sidor) i kategorin Router. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

Quick Installation Guide

AC1900 MU-MIMO Wi-Fi Router

* Images may dier from actual products.

If your internet comes from an Ethernet outlet, connect the router’s WAN port to it, then follow Step 4 and Step 5.

If you want to configure this new router as an access point to extend your network, refer to the Access Point Mode

section on the back page.

Connect the Hardware

Flip the page over to complete network setup.

Connect the power adapter to

the router and turn it on.

Note: If the 2.4 GHz LED and 5 GHz LED are off, press and hold the

WPS/Wi-Fi On/Off button on the back for more than 5 seconds. Both the

LEDs should turn on.

Power

Internet

2.4 GHz

5 GHz

Check for the following LEDs to confirm the

hardware connection, then refer to the next

section to set up the internet.

Modem

Power adapter

Router

Unplug your modem, and remove

the backup battery if it has one.

Connect the powered-off modem

to the router’s WAN port with an

Ethernet cable.

Power on the modem, and

then wait about 2 minutes

for it to restart.

Power adapter

Set up with videos:

Scan the QR code or visit

https://www.tp-link.com/support/setup-video/#wi--routers

to search for the setup video of your product.

WAN

POWER

Power ON / OFF

Need Help?

Q1. What should I do if I cannot access the web management page?

Reboot your router and try again.

If the computer is set to a static IP address, change its settings to obtain an IP

address automatically.

Verify that is correctly entered in the web browser. Alternatively, http://tplinkwifi.net

enter in the web browser and press .http://192.168.0.1 http://192.168.1.1 or Enter

Use another web browser and try again.

Disable and enable the network adapter being used.

Q2. What should I do if I cannot access the internet?

Reboot your modem and router, then try again.

Check if the internet is working normally by connecting a computer directly to the

modem using an Ethernet cable. If it is not, contact your internet service provider.

check whether the internet IP address is valid or not. If it is not, check the hardware

connection or contact your internet service provider.

For cable modem users, log in to the web management page of the router. Go to

Advanced Network Internet MAC Clone Clone Current Device MAC > > > , select

and click . Then reboot both the modem and the router. SAVE

Q3. How do I restore the router to its factory default settings?

With the router powered on, use a pin to press and hold the button on the RESET

back until the Power LED blinks.

Backup & Restore > Factory Default Restore FACTORY RESTORE, and click . The

router will restore and reboot automatically.

Q4. What should I do if I forget my web management page password?

If you are using a TP-Link ID to log in, click Forgot password on the login page and

then follow the instructions to reset it.

Alternatively, refer to to reset your router, then visit to create Q3 http://tplinkwi.net

a new login password.

Q5. What should I do if I forget my wireless network password?

If you have not changed the default wireless password, it can be found on the label

at the bottom of the router.

Connect a computer directly to the router using an Ethernet cable. Log in to the

router’s web management page at , and go tohttp://tplinkwi.net Wireless >

Wireless Settings to retrieve or reset your wireless password.

Method 1: Via TP-Link Tether App

1. Download the Tether app.

Scan for Tether Tether

Launch a web browser, and enter http://tplinkwifi.net http://192.168.0.1 or

in the address bar. Create a password to log in.

Follow the step-by-step instructions to set up the internet connection and

2. Connect the router to the internet.

Note: If the login window does not appear, please refer to of Q1 Need Help? in this guide.

Method 2: Via a Web Browser

Wired

Turn off the Wi-Fi on your computer and connect to the router using an

Ethernet cable.

1. Connect your device to the router (wired or wireless).

Wireless

Find the SSID (network name) and wireless password printed on the label

at the bottom of the router.

Click the network icon of your computer or go to Wi-Fi settings of your

smart device, and then select the SSID to join the network.

Access Point Mode

If you already have a router, you can switch this new router to Access Point

mode to extend your existing network. Follow the steps below.

1. Power on the router.

2. Connect the router’s to your existing router’s Ethernet port WAN port

via an Ethernet cable as shown above.

3. Connect a computer to the router via an Ethernet cable or wirelessly by

using the (network name) and SSID Wireless Password printed on the

label at the bottom of the router.

4. Launch a web browser, and enter http://tplinkwifi.net in the address bar.

Create a password to log in.

5. Quick Setup Change ModeRun the , click in the top right corner then

select Access Point Mode.

Note: You can also Advanced Operation Mode Access Point Modego to > to switch to .

6. Wait for the router to reboot, then log in and follow the Quick Setup to

complete the setup.

Set Up the Network 2

Existing Router

net4EInternet

Ethernet

New Router Clients

2. Open the Tether app and log in with your TP-Link ID.

Note: If you don’t have an account, create one first.

3. Tap the button in the Tether app and select Wireless

Router > Standard Routers. Follow the steps to

complete the setup and connect to the internet.

Button Explanation

DESCRIPTIONBUTTON

Press and hold for 1 second to enable the WPS function.

Press and hold for about 5 seconds to turn on or o the

wireless function of the router.

WPS/

Wi-Fi On/O

Press and hold this button until the Power LED blinks to

reset the router to its factory default settings.

RESET

WAN

Choose Your Device Type

Gaming Router

Range Extender

Wireless Router

Note: Due to Tether app updates,

your actual user interface and

pathway may differ from those

depicted here.

Safety Information

Keep the device away from water, fire, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service,

please contact us.

Do not use damaged charger or USB cable to charge the device.

Do not use any other chargers than those recommended.

Do not use the device where wireless devices are not allowed.

Adapter shall be installed near the equipment and shall be easily accessible.

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of the Radio Equipment Regulations 2017.

The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/

For technical support, replacement services, user guides, and other

information, please visit https://www.tp-link.com/support, or simply scan the

QR code.

Let’s Get Started

http://tplinkwi.net

Produktspecifikationer

Varumärke:	TP Link
Kategori:	Router
Modell:	Archer C86
Bredd:	20 mm
Djup:	120 mm
Höjd:	120 mm
Förpackningens vikt:	130 g
Förpackningens bredd:	174 mm
Djuppackning:	143 mm
Förpackningshöjd:	32 mm
Anslutningsteknik:	Bedraad
Typ av seriell anslutning:	RS-232
Certifiering:	CE, FCC, RoSH
Hållbarhetscertifikat:	RoHS
Plug and play:	Ja
Anslutningar:	1 - DB9 M
Förvaringstemperatur:	-20 - 100 °C
Internera:	Ja
Kompatibla operativsystem:	DOS, Windows 95/ 98SE/ 2000/ XP(32/64bit)/ Server 2003(32/64bit)/ Vista(32/64bit)/ 7(32/64bit)/ Server 2008 R2, Linux, & Mac OS 10.4.x &\r\nWindows XP Embedded/ POS Ready 2009/ Embedded System 2009 OS
Mac-kompatibilitet:	Ja
Stöder Linux:	Ja
Värdgränssnitt:	PCI
Serveroperativsystem som stöds:	Windows Server 2003, Windows Server 2008 R2, Windows Server 2012
Seriell port(ar):	1
Chipset:	NetMos NM9820CV
Överföringshastighet:	0.920 Mbit/s
Drifttemperatur (TT):	-10 - 80 °C
Relativ luftfuktighet i drift (VV):	5 - 85 procent
Harmoniserad systemkod (HS):	84733020
Utgångsgränssnitt:	Serie