ZTE MF920V Bruksanvisning

ZTE Router MF920V

Läs nedan 📖 manual på svenska för ZTE MF920V (23 sidor) i kategorin Router. Denna guide var användbar för 21 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/23
Page 1 of 23
MF920A
4 - G WI FI HOTSPOT
USER MANUAL
Page 2 of 23
CHECK YOUR SYSTEM REQUIREMENTS
Your 4G -Wi Fi hotspot will connect to any device that supports Wi-Fi, 802.11 b/g/n
A web browser is required to log in to your Wi-Fi hotspot if you wish to make any
configuration changes.
USB driverless connection is also supported for Windows, MAC and LINUX
operating systems:
Windows 10, 8 (not including RT) / 7 / XP / Vista
MAC OS X 10.5.11 and above
Linux
Using the USB connection requires administrator rights to install and run the
software.
We suggest you switch off your anti-virus software before connecting the hotspot
- In some cases protection software can prevent automatic installation.
It is possible to start the installation process manually by clicking the Autorun icon
w hen it appears.
Page 3 of 23
GET TO KNOW YOUR 4G -FI HOTSPOTWI
Page 4 of 23
INSERT YOUR SIM CARD
1. Open the SIM tray cover to access the SIM slot and the Reset button.
2. Insert your SIM card carefully as shown:
3. Close the SIM tray cover.
4. You are now ready to power up your device and you’ll be on line in no time.-
IMPORTANT
This device supports a standard SIM or 2FF size.
Do not insert a micro SIM (3FF) or use a micro to mini SIM adaptor.
Use of 3rd party adaptors or non approved SIM card can damage your device.
Physical damage to the SIM card slot is not covered by warranty and will make
your device unusable.
TIPS
Remember to keep your plastic SIM card holder. It has a record of your SIM card
which you should keep handy.
If you cannot connect via Wi Fi because you have lost, changed or forgotten your -
password please connect your device to a computer and log in via the web User
Interface (192.168.0.1). See USB Installation for Tethered Connection.
Page 5 of 23
POWER UP YOUR WI4G -FI HOTSPOT
Press and hold the Power key for 3-4 seconds until the lights flash.
The LEDs flash in sequence to indicate the start up condition. During this
sequence the device functions are not available.
The Wi-Fi hotspot will be available after about 20 seconds.
Note: If you insert the charger with the device off, or the battery is flat, you can
only power up the device after about 20 seconds when the start up sequence is
complete.
Check the condition of your Wi-Fi hotspot as shown by the LED indicators.
LED INDICATORS
On, battery is low (<23%).
Flashing, battery is discharged, (< 12 %).
On, battery is OK (>23 %).
Flashing, battery is charging.
On, WPS is enabled, available for 2 minutes.
Flashing, Wi Fi is On.-
Off, Wi-Fi is off.
A new message has arrived. Check the web UI to read.
Not registered on the network.
No SIM SIM, invalid , PIN or PUK locked.
On, device is registered on 2G/3G,
Flashing, device is connected to 2G/3G.
Device is registered on 4G
Flashing, device is connected to 4G
During periods of inactivity it is normal for the LED’s to go out to preserve battery
life. Press the power key briefly to confirm the device status if required.
CONNECT DEVICES BY WI- FI
Your 4G -Wi Fi hotspot can connect up to five devices via Wi-Fi providing internet
access for all your devices on the go.
On the devices you wish to connect make sure Wi-Fi is switched on, then search
for Wi- Fi devices.
The Wi- Fi hotspot will show up as Virgin Mobile 4G_xxxxxx, click on this device
to connect.
Page 7 of 23
LOGIN TO THE USER INTERFACE
Open a browser and go to http://192.168.0.1 to access the hotspot home page.
The default login password is ‘admin’
Page 8 of 23
HOTSPOT HOMEPAGE OVERVIEW
Page 9 of 23
STATUS INDICATORS
Tip use your mouse to hover over the icons to see a brief description for each icon.
CONNECTED DEVICES
Click on 1. Access Devices to see the list of devices connected to your hotspot.
CONNECTION SETTINGS
Click on 2. (Network) Settings to view or configure your Network settings.
Note to make any changes you need to disconnect first.
Click on the On / Off switch to switch off your Network data connection
Page 10 23 of
CONNECTION MODE
The default state is to automatically connect to the network. If you wish to
change this behaviour, first disconnect from the network by selecting Off on the
device overview page then set Manual and press Apply to save your changes.
Enable Roaming if you wish to use the device overseas. (High data charges will
apply, check with your carrier)
NETWORK SELECTION
Network Selection is set to Automatic. You can choose to lock to preferred
network technologies such as 4G, 3G or 2G only.
Press the Disconnect button to change this setting if required.
If you make any changes, press Apply to save your changes
Page 11 23 of
APN
Disconnect the modem using the LTE/3G switch button on the home page.
Then go to Settings > APN
In Auto mode the device will provision the correct APN based on your SIM card
and service provider.
Select Manual to add a new APN
Press Add New to create a new APN
Add the Profile Name, eg Virgin
Enter the correct APN details eg virginbroadband
Press Save to save your new APN
Press the Profile drop down box
Select the new APN profile
Click on ‘Set as default’ to set the new APN as your preferred setting
Press the Help icon to get in context tips.
Normally there is no need to change these settings unless you change service
provider.
The Wi-Fi hotspot is locked to Virgin. If you use a SIM card from another
provider you may not be able to connect to the network.
Consult your new carrier to obtain alternate APN details for your device.
Page 14 23 of
ADVANCED SETTINGS > ROUTER
ADVANCED SETTINGS > FIREWALL
FIREWALL > PORT FILTERING
Select Enable to turn on the Port Filtering settings
You can apply filters based on MAC Address, Source IP Address, Destination IP
Address and select the action to drop or accept the packets.
Firewall settings are for advanced users and network administrators.
Page 16 23 of
ADVANCED SETTINGS > UPDATE
ADVANCED SETTINGS > OTHERS
Press Restart Device to reboot your system.
Press Reset Factory Settings to restore your device to factory defaults. This will
reset your SSID and Password to the default state.
TIP If you cannot connect via Wi Fi because you have lost, changed or forgotten -
your password please connect your device to a computer and log in via the web
User Interface (192.168.0.1)

Produktspecifikationer

Varumärke: ZTE
Kategori: Router
Modell: MF920V

Behöver du hjälp?

Om du behöver hjälp med ZTE MF920V ställ en fråga nedan och andra användare kommer att svara dig




Router ZTE Manualer

ZTE

ZTE MF289F Bruksanvisning

23 December 2024
ZTE

ZTE MU5001 Bruksanvisning

21 September 2024
ZTE

ZTE MC889 Bruksanvisning

17 September 2024
ZTE

ZTE MF192 Bruksanvisning

8 September 2024
ZTE

ZTE MF920V Bruksanvisning

4 Augusti 2024
ZTE

ZTE MF90C Bruksanvisning

2 Augusti 2024

Router Manualer

Nyaste Router Manualer