AXESS AXDSPL-GM32 Bruksanvisning

Läs nedan 📖 manual på svenska för AXESS AXDSPL-GM32 (10 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/10
AXDSPL-GM32
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 2/1/24 INSTAXDSPL-GM32
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Multimeter
TABLE OF CONTENTS
Installation Options 2 ...............................................
Installation 2 .............................................................
Connections 3-4 ........................................................
AXDSPL-BT Installation...........................................5
AXDSPL-SP Installation...........................................6
Mobile App 7-8 .........................................................
Specifications 9 .........................................................
GM DSP Interface With Pre-Wired Harness
2021-Up
Includes a DSP (Digital Signal Processor)
15 Band graphic EQ
4 inputs and 6 individually assignable outputs
Independent equalization for front, rear, and sub
Selectable low pass, band pass, and high pass filters
Selectable crossover slopes; 12db, 24db, 36db, 48db
Each channel can be delayed independently up to 10ms
Clipping detection and limiting circuits
Retains factory parking sensor chimes
Retains OnStar® voice prompts
Adjustable chime level
Designed for non-amplified models
Easy behind the radio installation with pre-wired harness
Internal header port for adding interface modules
Bass knob included for level control of subwoofer amp
Settings adjusted via Bluetooth® in a smart device application (tablet
or mobile phone), compatible with both Android and Apple devices
Read, write, and store configurations for future recall
Password protect feature available in the mobile app
Micro-B USB updatable
• AXDSPL-GM32 interface
• AXDSPL-GM32 output harness (LD-AX-DSP-OUT2)
• AXDSPL-GM32 vehicle T-harness (LD-DSP-GM32)
• Resistor Pad (LD-DSP-RPAD2)
• Bass knob (LD-BASSKNOB)
APPLICATIONS
Visit for current application list
Axxessinterfaces.com
www.MetraOnline.com
MetraOnline.com may be used to assist with dash
assembly instructions. Simply enter your Year,
Make, Model vehicle into the vehicle fit guide and
look for the Dash Kit Installation Instructions.
2
Adding a sub to a factory system:
This feature offers the ability to add a subwoofer to a factory system. (refer to page 3)
Adding a full-range amp & sub to a factory system:
This feature offers the ability to add a full-range amp and sub to a factory system. (refer to page 4)
16-pin header port:
Inside the interface is a 16-pin header port for adding optional modules (sold separately). Page 5
and 6 will show the installation and use of these modules.
- Bluetooth streaming interfaceAXDSPL-BT
- Toslink digital outputAXDSPL-SP
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Remove the factory radio †, then unplug all connectors.
2. AXDSPL-GM32 vehicle T-harness Install the to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. AXDSPL-GM32 vehicle T-harness AXDSPL-GM32 interface Plug the to the .
4. AXDSPL-GM32 interface harness AXDSPL-GM32 interface Plug the to the .
5.
Download and install the from the or AX-DSP-XL app Google Play Store Apple App
Store
.
6.
Cycle the ignition on.
7. Bluetooth Connection Open the app then select the tab. Follow the instructions to
pair the mobile device to the interface. Refer to page 7 for more information.
8. Configuration Lock Down Scroll to the tab then select the vehicle type. Press the
button to save the configuration. Refer to page 8 for more information.
9. Connect the amp turn-on wire.
10. Adjust the settings in the app as desired. Press the button to save any Lock Down
new configurations.
Refer to Metra online for dash disassembly. If Metra makes a dash kit for the vehicle,
disassembly will be within those instructions.
Anytime the interface is locked down the key must be cycled off then back on
INSTALLATION OPTIONS INSTALLATION
3
REV. 2/1/24 INSTAXDSPL-GM32
Factory Radio
These outputs can be used for
additional sub amps, or r addingfo
onto the system at a later date
5
5
4
3
2
1
RCA Jacks
(sold separately)
Keep Connec dte
Any remaining wires
tape o and disregard
Bass Knob
Factory Radio Harness
Interface
Any remaining wires
tape o and disregard
Vehicle T-Harness
Interface Harness
ADDING A SUB TO A FACTORY SYSTEM
Black - Ground
Orange - Control
Blue/White - Amp Turn-On Wire

Produktspecifikationer

Varumärke: AXESS
Kategori: Inte kategoriserad
Modell: AXDSPL-GM32

Behöver du hjälp?

Om du behöver hjälp med AXESS AXDSPL-GM32 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad AXESS Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer