AXESS AXPIO-CAM1 Bruksanvisning

Läs nedan 📖 manual på svenska för AXESS AXPIO-CAM1 (24 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/24
AXPIO-CAM1
I N S TA L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 7/25/24 INSTAXPIO-CAM1
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal before
installing this product. Ensure that all installation
connections, especially the air bag indicator lights, are
plugged in before reconnecting the battery or cycling
the ignition to test this product.
NOTE: Refer also to the instructions included with the
aftermarket accessory before installing this device.
TABLE OF CONTENTS
Interface Installation 2 .............................................
Dash Disassembly 2-3 ..............................................
Connections 4-5 ........................................................
Kit Assembly 6 ..........................................................
Radio Operations 7-8 ...............................................
Chevrolet Camaro 2016-2018
KIT FEATURES)
Designed for Pioneer DMH-WC5700NEX receivers
Allows for the retention and adjustment of the factory personalization
menu through the Pioneer radio
Provides a visual view of HVAC and gauges on the Pioneer screen
(cannot be adjusted via the screen)
(cont. on page 2)
KIT COMPONENTS
•A) Display Screen Housing • B) Display Screen Trim Bezel • C) Display Screen Trim • D) Brackets •E) Panel Clips (6) • F) Phillips Screws (4)
Not Shown: Radio Interface, LD-LAN09-PIO, LD-LAN10-PIO, AXEXH-GM09, AXEXH-GM10, LD-BACKCAM-MOST, LD-GMSWC, AD-EU5, 40-GPS-PIO, PR04AVIC-PIO / PRO4-
PIORCA, LD-AX-SPK, AXUSB-GM6
Visit for more detailed information about the product and
AxxessInterfaces.com
up-to-date vehicle specific applications.
WIRING & ANTENNA CONNECTIONS (sold separately)
• Antenna Adapter: 40-EU55
• Steering Wheel Control Interface: AXSWC
RGB Extension Cable: Pioneer part # CD-RGB150A
(not sold by Metra)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32" socket wrench
A B DC E F
2
KIT FEATURES (cont. from cover)
Complete Plug-n-Play installation
Includes dash kit with Axxess interface and
vehicle-specific T-harness
Includes a 3' USB/AUX/HDMI replacement
cable with panel
Includes radio antenna adaptor for GPS
Provides accessory power (12-volt 10-amp)
Provides NAV outputs (parking brake,
reverse, speed sense)
Retains audio controls on the steering whee
l
Works in both single and dual-zone vehicles
Retains safety chimes through an included
off-board speaker
USB Micro B updatable
Dash kit is painted scratch-resistant matte
black to match the factory finish
KIT FEATURES
(CONT.)
DASH DISASSEMBLY
Models equipped with a 7-inch touchscreen radio:
1. Using the panel removal tool, gently unclip,
unplug, and remove the radio control trim
panel. (Figure A)
2. Remove (4) 9/32" screws securing the
radio, disconnect the wiring, and then
remove the radio. (Figure B)
Continue to Connections
(Figure A)
(Figure B)
INTERFACE INSTALLATION
Install the provided speaker in the dash prior
to assembling the radio components.
Note: Make sure this is mounted in a location
suitable for the driver to hear. (Audio level
for the speaker can be changed via the radio,
once installed.)
3
REV. 7/25/24 INSTAXPIO-CAM1
(Figure C)
(Figure D)
Models equipped with an 8-inch touchscreen radio:
1. Using the panel removal tool, carefully
unclip and remove the trim surrounding
the radio controls. (Figure C)
2. Remove (2) 9/32" screws securing the
radio, disconnect the wiring, and then
remove the radio. (Figure D)
Continue to Connections
DASH DISASSEMBLY
(CONT.)
If using the LD-LAN09-PIO:
1. Using the panel removal tool, unclip the
plastic shroud around the steering wheel
column. (Figure E)
2. LD-GMSWC Connect the to the 10-pin
straight row connector located in the
steering column.
3. LD-GMSWC Route the cable through the
steering column into the dash and back
towards the radio area.
4. Remove (3) bolts from the lower trim
cover. Rotate the steering wheel to gain
access to the bolts, then remove the
forward facing bolts. (Figure F)
NOTE: LD-LAN09-PIO If RPO is IO5 or IO6, use the .
If RPO is IOB, use the .LD-LAN10-PIO
(Figure E)
3
2
1
(Figure F)

Produktspecifikationer

Varumärke: AXESS
Kategori: Inte kategoriserad
Modell: AXPIO-CAM1
Färg på produkten: Meerkleurig
Förpackningens vikt: 134 g
Förpackningens bredd: 141 mm
Djuppackning: 191 mm
Förpackningshöjd: 46 mm
Rekommenderad ålder (max): 12 jaar
Rekommenderad ålder (min): 6 jaar
Typ av förpackning: Doos
Hållbarhetscertifikat: Forest Stewardship Council (FSC) Mix
Föreslaget kön: Jongen/meisje
Antal bitar: 97 stuk(s)
Ljudeffekter stöds: Nee
Figur medföljer: Ja
Typ produkt: Bouwpakket
EU TSD-varning: Niet geschikt voor kinderen onder de 36 maanden
Monterade mått: 70 x 90 x 70 mm
Antal spelfigurer: 1 stuk(s)
Baserat på: Film
Publiceringsdatum: 01/01/2018
Antal leksaksminifigurer: 3 stuk(s)

Behöver du hjälp?

Om du behöver hjälp med AXESS AXPIO-CAM1 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad AXESS Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer