AXESS TYTO-02 Bruksanvisning

AXESS Inte kategoriserad TYTO-02

Läs nedan 📖 manual på svenska för AXESS TYTO-02 (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/8
TYTO-02
I N S TA L L AT I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 6/26/19 INSTTYTO-02
Product Info
INTERFACE FEATURES
INTERFACE COMPONENTS
OPTIONAL ACCESSORIES (sold separately)
TOOLS REQUIRED
• Cutting tool • Crimping tool • Tape • Connectors
(example: butt-connectors, bell caps, etc.)
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................3
Programming .........................................................3
Toyota Amplifier Interface 2012-up
• Provides wires for multimedia radios (park brake, reverse)
•
Designed for amplified systems
• High level speaker input
• Retains balance and fade
• Prewired ASWC-1 harness (ASWC-1 sold separately)
• Pre-wired AX-CUSTOM-BT harness (AX-CUSTOM-BT sold separately)
• Micro-B USB updatable
• TYTO-02 interface • TYTO-02 harness
• 16-pin harness with stripped leads
Steering Wheel Control Interface: ASWC-1
Vehicle Customization Interface: AX-CUSTOM-BT
APPLICATIONS
Toyota
4Runner 2014-up
Avalon 2013-up
Camry (with NAV) 2012-2017
Highlander 2014-up
Prius 3rd gen. (with NAV) 2012-2015
Prius PHV (with NAV) 2012-2015
Prius V 2012-2017
Rav-4 2014.5-2018
Sequoia (with NAV) 2013
Sequoia 2014-up
Sienna 2015-2017
Tacoma 2014-2015
Tundra 2014-up
Venza (with HDD based NAV) 2013-2014
Venza 2015
2
CONNECTIONS
From the 16-pin harness with stripped leads to the aftermarket radio:
• Connect the wire to the amp turn on wire.Blue/White
• Connect the wire to the right front positive speaker output.Gray
• Connect the Gray/Black wire to the right front negative speaker output.
• Connect the wire to the left front positive speaker output.White
• Connect the wire to the left front negative speaker output.White/Black
• Connect the wire to the radio’s left rear positive speaker output.Green
• Connect the wire to the radio’s left rear negative speaker output.Green/Black
• Connect the wire to the radio’s right rear positive speaker output.Purple
• Connect the wire to the radio’s right rear negative speaker output.Purple/Black
• Tape off and disregard the following (6) wires, they will not be used in this application:
Brown Light Green Blue/Pink Green/Purple Orange/White, , , , , Red
From the TYTO-02 harness to the aftermarket radio:
• Connect the wire to the ground wire.Black
• Connect the Yellow wire to the battery wire.
• Connect the wire to the accessory wire.Red
• If the aftermarket radio has an illumination wire, connect the Orange/White wire to it.
The following (2) wires are only for multimedia/navigation radios that require these wires.
• Connect the wire to the reverse wire.Green/Purple
• Connect the wire to the parking brake wireLight Green
• Connect the and RCA jacks to the audio AUX-IN jacks from the aftermarket radio.Red White
12-pin pre-wired ASWC-1 harness & 3.5mm jack
This harness and 3.5mm jack are to be used with the ASWC-1 (sold separately) to retain
steering wheel audio controls. If the ASWC-1 is not being used, disregard this harness &
3.5mm jack. If it will be used, please refer to the ASWC-1 instructions for radio connections and
programming. Disregard the harness that comes with the ASWC-1.
16-pin pre-wired AX-CUSTOM-BT harness
This harness is to be used along with the AX-CUSTOM-BT (sold separately) to retain the
personalization menu that is lost when removing the factory radio. If the AX-CUSTOM-BT is not
being used, disregard this harness. If it will be used, refer to the AX-CUSTOM-BT manual for app
instructions. Disregard the harness that comes with the AX-CUSTOM-BT.
3
REV. 6/26/2019 INSTTYTO-02
With the key in the off position:
Locate the factory radio harness in the vehicle and complete all necessary connections to the 1.
aftermarket radio.
Connect the and the 2. 16-pin harness with stripped leads TYTO-02 harness into the TYTO-02
interface.
Connect the 3. TYTO-02 harness to the factory radio harness in the vehicle.
• Turn the key (or push-to-start button) to the ignition position and wait until the radio comes on.
The factory amplifier should come on and you should hear sound at this point.
• Test all functions of the installation for proper operation, before reassembling the dash.
INSTALLATION PROGRAMMING

Produktspecifikationer

Varumärke: AXESS
Kategori: Inte kategoriserad
Modell: TYTO-02

Behöver du hjälp?

Om du behöver hjälp med AXESS TYTO-02 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad AXESS Manualer

AXESS

AXESS AXDSPX-BM1 Bruksanvisning

26 Oktober 2024
AXESS

AXESS AXBUCS-MZ286V Bruksanvisning

26 September 2024
AXESS

AXESS 99-7014HG Bruksanvisning

26 September 2024
AXESS

AXESS AXGM-17 Bruksanvisning

26 September 2024
AXESS

AXESS AXGMLN-34 Bruksanvisning

26 September 2024
AXESS

AXESS 99-7382HG Bruksanvisning

26 September 2024
AXESS

AXESS GMOS-12 Bruksanvisning

26 September 2024
AXESS

AXESS XSVI-1788-NAV Bruksanvisning

26 September 2024
AXESS

AXESS 99-7510HG Bruksanvisning

26 September 2024
AXESS

AXESS AXBUCS-NI246V Bruksanvisning

26 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024