HP Aruba AP-303 Bruksanvisning

HP Router Aruba AP-303

Läs nedan 📖 manual på svenska för HP Aruba AP-303 (13 sidor) i kategorin Router. Denna guide var användbar för 17 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/13
Aruba 303 Series Campus Access Points
Installation Guide
Rev03 | August 2018 1
The Aruba 303 Series campus access points support IEEE802.11ac Wave 2, delivering high performance with the
MU-MIMO (Multi-User Multiple-Input, Multiple-Output) technology, while also supporting 802.11a/b/g /n wireless
services. The 303 Series access points can be deployed in either a controller-based (ArubaOS) or controller-less
(InstantOS) deployment mode.
The 303 Series access points provide the following capabilities:
IEEE 802.11a/b/g/n/ac operation as a wireless access point
IEEE 802.11a/b/g/n/ac operation as a wireless air monitor
Compatibility with IEEE 802.3af PoE
Integrated Bluetooth Low Energy (BLE) radio
Package Contents
303 Series Access Point
Ceiling mount bracket (Spare: AP-220-MNT-C1 mount kit)
Startup guide
Declaration of Conformity for Europe
Hardware Overview
The following sections outline the hardware components of the 303 Series access points.
Figure 1 303 Series (front view)
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including
the original packing materials. Use these materials to repack and return the unit to the supplier if needed.
System Status
Radio Status
2Aruba 303 Series Campus Access Points | Installation Guide
LED
The 303 Series access points have two LEDs that indicate the system and radio status of the device. These two
LEDs can be configured via ArubaOS or Aruba Instant software into three separate modes:
Normal mode (by default): See Table 1
Both LEDs off
Blink mode: Both LEDs blink green (synchronized)
1 blinking: one second on, one second off, 2 seconds cycle
2 flashing: mostly on, fraction of a second off, 2 second cycle
3 alternating: one second each color, 2 second cycle
Table 1 303 Series Access Point LEDs Status in Normal Mode
LED Color/State Meaning
System Status Off Device powered off
Green- Blinking1Device booting, not ready for use
Green- Solid Device ready for use, no restrictions
Green- Flashing2Device ready for use, uplink negotiated in sub optimal speed
(<1Gbps)
Red- Solid System error condition - immediate action required
Radio Status Off Device powered off, or both radios disabled
Green- Solid Both radios enabled in access mode
Green- Blinking One radio enabled in access mode, other disabled
Amber- Solid Both radios enabled in monitor mode
Amber- Blinking One radio enabled in monitor mode, other disabled
Alternating3Green: one radio in access mode
Amber: one radio in monitor mode
Aruba 303 Series Campus Access Points | Installation Guide 3
Figure 2 303 Series (rear view)
E0/POE Port
The 303 Series access point is equipped with one 10/100/1000Base-T auto-sensing, MDI/MDX Ethernet port (E0)
for wired network connectivity. This port supports IEEE 802.3af Power over Ethernet (PoE), accepting 48Vdc
(nominal) as a standard defined Powered Device (PD) from a Power Sourcing Equipment (PSE) such as a PoE
midspan injector, or network infrastructure that supports PoE.
Console Port
The console port is a Micro-B connector located on the back of this device. A proprietary serial adapter cable (AP-
CBL-SERU) is needed to use this interface. It is sold separately to connect the AP to a serial terminal or a laptop
for direct local management.
DC Power Socket
If PoE is not available, a proprietary Aruba AP-AC-12V30B power adapter kit (sold separately) can be used to
power the 303 Series access points.
DC Power Socket E0/POE Reset Console
Kensington Lock
Slot

Produktspecifikationer

Varumärke: HP
Kategori: Router
Modell: Aruba AP-303

Behöver du hjälp?

Om du behöver hjälp med HP Aruba AP-303 ställ en fråga nedan och andra användare kommer att svara dig




Router HP Manualer

Router Manualer

Nyaste Router Manualer