Ikan Lyra Bruksanvisning

Ikan Lättnad Lyra

Läs nedan 📖 manual på svenska för Ikan Lyra (8 sidor) i kategorin Lättnad. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/8
© 2016 ikan Corporation. All rights Reserved
QUIC TAR U EKS T G ID
LW5
Lyra Daylight LED Half x 1 Soft Light
LB5
Lyra Bi-Color LED Half x 1 Soft Light
LW10
Lyra Daylight LED 1x1 Soft Light
LB10
Lyra Bi-Color LED 1 x 1 Soft Light
CHECKED BY
What’s Included
1 x Soft Light Fixture
1 x Yoke Mount
1 x Remote Control
1 x Power Supply w/ Cable
1 x AB Mount Battery Plate
1 x V-Mount Battery Plate
Getting to know your LYRA lights
PRECAUTIONS:
•Keep the fixture away from water and all flammable gases or liquids.
•Use only the recommended batteries.
•Handle the unit with care.
•DO NOT attempt to disassemble or repair the unit without first contacting service department at
ikancorp.com.
•Keep the unit clean and free of dust. The unit can be cleaned with a soft dry cloth.
•Use only parts provided by the manufacture.
•Always use caution when plugging in the fixture.
Mounting the Lyra to a Stand:
The Lyra LED Soft Light comes with a pre-installed yoke and combo mount. This allows the fixture to easily
sit and adjust on any stand. The 30° yoke gives the light free-range motion without obstructions. The Baby
5/8" and Junior 1-1/8" Combo Pin allows the user a wide range of stands. The light can be mounted either
horizontally or vertically on a
5/8" baby pin.
Power the LEDs:
The Lyra light comes with an included AC power supply and 6 foot cable. This allows the user to plug
into any standard 120-240VAC electrical outlet. The Lyra LED Soft light can be powered from either an
AB Mount pro battery, or a V-Mount battery. The fixture comes standard with either AB-Mount or V-Mount
plates. The plates can be easily removed and replaced for the type of batteries that are available.
Adjusting the Color & Brightness of the Light:
The Rayden LED light is controlled by the large yellow knob on the rear of the fixture. The knob was
designed with the idea that it could be reached and adjusted when the light is up on a stand. The knob
has three push settings.
1. The default setting is the brightness from 10%-100% brightness.
2. By pressing in on the knob the color temperature can be adjusted. (Bi-Color Lights)
Remote Control
The light can be adjusted also using the RF remote control. The use of the remote allows for multiple lights
to be connected as well as control of the brightness.
Remote Control Button Functions
• Press & Hold “A” for 5 seconds to sync remote control to light(s)
• Press “A” to power ON/OFF (for Daylight Light only)
• Press “A”& "B" to power ON/OFF (for Bi-Color Light only)
• Press “B” to adjust 4 levels of light intensity in increments of 25%
• Press and Hold “C” & “D” for 5 seconds to Enable/Disable sound
• Hold down “C” to increase light intensity 0%-100%
• Hold down “D” to decrease light intensity 100%-0%
Optional Accessories
Some other products that work well with the LYRA Soft Lights available from Ikan include:
HD-STND
ROLLR-STND10
CP-STND-V3
SW-04
KCP-703
Heavy Duty Light Stand
2 Stage Roller Stand 10 ft 6 in
Compact Light Stand Version 3
Safety Wire
Stage Clamp w/ 16mm Stud
Changing the Pro Battery Plate
Adding or removing the pro battery plate on the back of your fixture can be easily achieved.
NOTE: The fixture comes pre-installed with the Gold-Mount battery plate.
The process starts with the removal of the four screws on the four corners of the plate.
Once the screws are removed, separate the plate from the back of the fixture.
Unplug the 2-pin connector from the fixture.
Store the screws and the Gold-Mount in a safe place.
Reattaching the V-Mount plate is a simple process.
Plug the wired 2-pin connector into the fixture where we just unplugged the Gold-Mount
plate at the back of the light. Orient the holes on the plate to match up with the screw holes
on the back of the fixture. Using the screws supplied with the V-Mount plate, screw in the
plate until it is snug against the back of the fixture. Do not over-tighten the screws.
You’re now ready to install your battery to the V-Mount plate.

Produktspecifikationer

Varumärke: Ikan
Kategori: Lättnad
Modell: Lyra

Behöver du hjälp?

Om du behöver hjälp med Ikan Lyra ställ en fråga nedan och andra användare kommer att svara dig


Lättnad Ikan Manualer

Ikan

Ikan LWX8 Bruksanvisning

25 September 2024
Ikan

Ikan LBX8 Bruksanvisning

25 September 2024
Ikan

Ikan LBX20 Bruksanvisning

24 September 2024
Ikan

Ikan LBX30 Bruksanvisning

24 September 2024
Ikan

Ikan LBX5 Bruksanvisning

24 September 2024
Ikan

Ikan RBX5 Bruksanvisning

24 September 2024
Ikan

Ikan LBX40 Bruksanvisning

24 September 2024
Ikan

Ikan RB10 Bruksanvisning

24 September 2024
Ikan

Ikan OYB5 Bruksanvisning

24 September 2024
Ikan

Ikan ILED312-V2-KIT Bruksanvisning

24 September 2024

Lättnad Manualer

Nyaste Lättnad Manualer

Nedis

Nedis WIFILS52CRGBW Bruksanvisning

16 Januari 2025
Nedis

Nedis BTTNTP-44W120 Bruksanvisning

15 Januari 2025
Philips

Philips HF3304 Bruksanvisning

14 Januari 2025
Nedis

Nedis BTTNTP-22W60 Bruksanvisning

14 Januari 2025
Busch + Müller

Busch + Müller Kite Bruksanvisning

11 Januari 2025
Kogan

Kogan KASMCLLT30B Bruksanvisning

9 Januari 2025
OttLite

OttLite VW2009 Bruksanvisning

9 Januari 2025
Neewer

Neewer VL67C Bruksanvisning

9 Januari 2025
Neewer

Neewer PL60B Bruksanvisning

9 Januari 2025
Neewer

Neewer AP100B Bruksanvisning

9 Januari 2025