Sonneman Lithe 3466 Bruksanvisning

Sonneman Lättnad Lithe 3466

Läs nedan 📖 manual på svenska för Sonneman Lithe 3466 (3 sidor) i kategorin Lättnad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

Assembly Instructions

Lithe

Product Information

and Warnings

3463, 3464, 3466, 3468

3' Pendant

4' Pendant

6' Pendant

8' Pendant

IMPORTANT

Always disconnect the power before installing or replacing

Luminaires and before cleaning or other maintenance.

Consult a qualied, licensed electrician to ensure correct branch

circuit conductor.

Consulter un électricien qualié pour vous assurer que les

conducteurs de la dérivation sont adéquats.

Please read all included assembly instructions and warnings carefully

before installation. Contact Customer Service if you have any

questions or concerns. Before installation, please confirm that the

fixture is compatible with your supply voltage and dimming system,

if present.

LEDs are highly sensitive electronic devices, and must be treated

with care. Do not open any factory sealed compartments, and avoid

touching the LEDs with your hands or any object.

Although all our fixtures are equipped with protective devices,

LED electronic systems are vulnerable to power surges and supply

variations. Do not install LED fixtures on the same circuit as any

motors, appliances, or HVAC systems.

Do not remove or bypass any LED Driver or Transformer that is

provided with the fixture, and do not replace or substitute with

another power supply.

Fixtures must be wired in parallel on independent leads; do not

"daisy chain" multiple fixtures together or wire them in series.

All factory-made splices and connections must remain intact. LED

circuits are carefully designed and built, and improper connections

may damage the fixture.

The ends of coaxial pendant cords have been precisely stripped

and split at the factory and must not be field cut. Excess cord or

cable should be neatly coiled and reserved in the fixture canopy.

Any mounting hardware is provided for your convenience

and should be used with discretion. Always use the appropriate

hardware for the mounting surface.

Instructions D'Installation

Multiple U.S. and foreign patents pending.

Assembly Instructions

Adjust the steel cable to the desired height: To

shorten the cable, push the cable up and it will lock

automatically. To lengthen the cable, lift up on the

cable and push up on the plunger lock (H). While

keeping the plunger lock depressed, lower the

cable to the desired length. Release the plunger

lock to set.

6. Fit the canopy (G) over the mounting plate (B), tucking

the power supply, power cord, and any loose wires

inside. Use the two canopy screws (I) to fasten the

canopy to the mounting plate.

7. If necessary, make any nal adjustments to the

hanging length of the power cord and/or steel cable.

Once the position is nal, trim the steel cable where it

exits the cable hanger.

8. Restore power to the outlet box.

1. Shut o power to the outlet box (A).

2. Attach the mounting plate (B) to the outlet box (A)

with the outlet box screws (C).

3. Determine the location of the cable hanger (D) based

on the desired orientation of the xture and the

distance between the hanging points. Attach the

cable hanger base to the ceiling using appropriate

hardware. Screw the main body of the cable hanger

onto the base.

4. Make appropriate electrical connections to the power

supply (E) using wire nuts:

a. Connect the power supply’s live wire to the live

supply wire.

b. Connect the power supply’s neutral wire to the

neutral supply wire.

c. Connect the xture’s ground wire (green or

uncoated) to the ground supply wire. If no ground

wire is present in the outlet box, connect the

xture's ground wire to the mounting plate (B)

using the green screw (included).

5. Determine height at which the xture is to be hung.

a. Adjust the power cord to the desired length: Use

the screwdriver to loosen the slotted set screw (F).

Adjust length of power cord. Tighten the set screw

to set. Reserve extra cord in the canopy (G).

b. Insert the steel cable into the cable hanger (D).

Care Instructions:

Use a clean, dry cloth when dusting.

To protect the nish, avoid any harsh

abrasives or chemicals.

Note:

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge)

type dimmers, Incandescent (Leading-Edge) type dimmers, and

0-10V type dimmers only.

(G)

(B)

(C)

(I)

(A)

(D)

3466

(F)

(H)

(E)

3463

3468

3464

If eld-cutting is required,

please follow these instructions:

1. Make a 1” slice along the length of the cord's outer jacket (Fig. 1).

CAUTION: Do not cut through the outer braided conductor.

2. Carefully strip the outer jacket of the cord and keep the outer

braided conductors intact (Fig. 1).

3. Slide the outer braided conductor back to create a bulge

and reveal the inner stranded conductor (Fig. 2).

4. Bend the cord to create an opening through the bunched-up

portion of outer braided conductor, then pull out the inner

stranded conductor (Fig. 3)

5. Twist together the outer braided conductor to form the negative

wire of the xture, then strip 5/8” o the end of the inner stranded

conductor to form the positive wire of the xture (Fig. 4).

6. Re-splice all power cords.

Appendix A

Inner Stranded Conductor

End

View

Insulation

Outer Jacket

Outer Braided Conductor

FAILURE TO FOLLOW THESE

INSTRUCTIONS WILL VOID THE WARRANTY

Fig. 1 Fig. 2 Fig. 3 Fig. 4

Outer Braided

Conductor

Outer Jacket

Insulated Stranded

Conductor

Insulated

Stranded

Conductor

Negative Wire

(Outer Braided Conductor)

Positive Wire

(Insulated Stranded

Conductor)

Coaxial Power Cord:

Coax Splicing

Assembly Instructions

Produktspecifikationer

Varumärke:	Sonneman
Kategori:	Lättnad
Modell:	Lithe 3466

Behöver du hjälp?

Om du behöver hjälp med Sonneman Lithe 3466 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Lättnad Sonneman Manualer

Sonneman Fino Duo 3779 Bruksanvisning

3 April 2025

Sonneman Turo 3442 Bruksanvisning

3 April 2025

Sonneman QB 7520 Bruksanvisning

3 April 2025

Sonneman Turo 3441 Bruksanvisning

3 April 2025

Sonneman Lithe 3453 Bruksanvisning

3 April 2025

Sonneman Lithe 3466 Bruksanvisning

3 April 2025

Sonneman Suspenders SLS0157 Bruksanvisning

2 Januari 2025

Sonneman Suspenders SLS0164 Bruksanvisning

2 Januari 2025

Sonneman Stix Plus 2792.16 Bruksanvisning

26 September 2024

Sonneman Stix 2771.16 Bruksanvisning

26 September 2024

Lättnad Manualer

Nyaste Lättnad Manualer

NUVO Clarksville 60/8064 Bruksanvisning

3 April 2025

Maxim Meridian 25291OFNAB Bruksanvisning

3 April 2025

Trust Vybz GXT 905 Bruksanvisning

3 April 2025

Lexon Mimi Bruksanvisning

3 April 2025

Altman PHX LVD 5000K Bruksanvisning

3 April 2025

Ikan MB8 Bruksanvisning

3 April 2025

Ikan MB4-2PT-KIT Bruksanvisning

3 April 2025

Kino Flo FreeStyle T42 LED Bruksanvisning

3 April 2025

Kino Flo FreeStyle T22 LED Bruksanvisning

3 April 2025

Kino Flo FreeStyle T21 LED Bruksanvisning

3 April 2025