Sonneman Turo 3442 Bruksanvisning

Sonneman Lättnad Turo 3442

Läs nedan 📖 manual på svenska för Sonneman Turo 3442 (3 sidor) i kategorin Lättnad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/3
Multiple U.S. and foreign patents pending. ©2023 SONNEMAN - A Way of Light
Assembly Instructions
Page 1
Turo
Product Information
and Warnings
3440, 3441, 3442
Short Sconce,
Medium Sconce,
Long Sconce
IMPORTANT
Always disconnect the power before installing or replacing
Luminaires and before cleaning or other maintenance.
Consult a qualied, licensed electrician to ensure correct branch
circuit conductor.
Consulter un électricien qualié pour vous assurer que les
conducteurs de la dérivation sont adéquats.
Please read all included assembly instructions and warnings carefully
before installation. Contact Customer Service if you have any
questions or concerns. Before installation, please confirm that the
fixture is compatible with your supply voltage and dimming system,
if present.
LEDs are highly sensitive electronic devices, and must be treated
with care. Do not open any factory sealed compartments, and avoid
touching the LEDs with your hands or any object.
Although all our fixtures are equipped with protective devices,
LED electronic systems are vulnerable to power surges and supply
variations. Do not install LED fixtures on the same circuit as any
motors, appliances, or HVAC systems.
Do not remove or bypass any LED Driver or Transformer that is
provided with the fixture, and do not replace or substitute with
another power supply.
Fixtures must be wired in parallel on independent leads; do not
"daisy chain" multiple fixtures together or wire them in series.
All factory-made splices and connections must remain intact. LED
circuits are carefully designed and built, and improper connections
may damage the fixture.
The ends of coaxial pendant cords have been precisely stripped
and split at the factory and must not be field cut. Excess cord or
cable should be neatly coiled and reserved in the fixture canopy.
Any mounting hardware is provided for your convenience
and should be used with discretion. Always use the appropriate
hardware for the mounting surface.
Mounting without a canopy
using a remote driver
1. Shut o power to the branch circuit.
2. The power supply (D) must be installed in a remote and accessible location
near the xture (E) in accordance with local electrical code (Fig. 2). Make
appropriate connections:
a. Connect the power supply's live wire to the live supply wire.
b. Connect the power supply’s neutral wire to the neutral supply wire.
c. Connect the power supply’s positive (+) output wire to the necessary
length of red wire (not included) to reach the xture location.
d. Connect the power supply's negative (-) output wire to the necessary
length of black wire (not included) to reach the xture location.
3. Loosen set screws (A) and remove the xture mounting block (B).
4. Mount the xture mounting block (B) to the wall using drywall screws and
anchors (not included), or other hardware as appropriate. The center of the
mounting block is the center of your xture location, and where the low
voltage wires will come through.
5. Drill a small hole (F) at this xture location. and pull the xture's power leads
through the center hole of the mounting block.
6. Using the included connectors, connect the xture's positive (+) conductor
to the positive (red) low voltage wire and connect the xture's negative
(-) conductor to the negative (black) low voltage wire. Carefully store the
connectors in the mounting block.
7. Fit the xture (E) over the mounting block, then tighten the set screw (A) with
included Allen key to secure the xture in place.
8. Restore power to the branch circuit.
C
Fig. 2
D
A
B
E
F
Fig. 1
Multiple U.S. and foreign patents pending. ©2023 SONNEMAN - A Way of Light
Assembly Instructions
Page 2
Care Instructions:
Use a clean, dry cloth when
dusting. To protect the nish,
avoid any harsh abrasives or
chemicals.
Note:
This xture is dimmable
with ELV (Trailing-Edge),
Incandescent (Leading-
Edge), and 0-10V type
dimmers only.
Mounting with canopy
over an outlet box
Multiple U.S. and foreign patents pending. ©2023 SONNEMAN - A Way of Light
Assembly Instructions
Page 3
Care Instructions:
Use a clean, dry cloth when
dusting. To protect the nish,
avoid any harsh abrasives or
chemicals.
Note:
This xture is dimmable
with ELV (Trailing-Edge),
Incandescent (Leading-
Edge), and 0-10V type
dimmers only.
1. Shut o power to the outlet box (C).
2. To mount with the canopy (not included), remove the set screws (A) and
xture mounting block (B).
3. Loosen the canopy set screws (D) with included Allen key and remove
the mounting plate (F) from the canopy assembly (E).
4. Assemble the Luminaire (G) and the canopy assembly (E) together with
the provided screws (H).
5. Make appropriate electrical connections using wire nuts:
a. Connect the power supply’s live wire to the live supply wire.
b. Connect the power supply’s neutral wire to the neutral supply wire.
c. Connect the xture’s ground wire (green or uncoated) to the ground
supply wire. If no ground wire is present in the outlet box, connect
ground wire to the mounting plate (F) using the green screw
(included).
d. Carefully place power supply and electrical connections in outlet box
(C).
6. Attach the mounting plate (F) to the outlet box (C) using the provided
outlet box screws (J). Pay attention to the mounting plate direction, the 2
tabs should be facing down.
7. Install the xture to the mounting plate (F) by hooking the bar in the
xture onto the upper bend on the mounting plate. Secure with set
screws (D) using included Allen key.
8. Restore power to the outlet box (A).
HA F
D
C
B
G J
E
Fig. 1

Produktspecifikationer

Varumärke: Sonneman
Kategori: Lättnad
Modell: Turo 3442

Behöver du hjälp?

Om du behöver hjälp med Sonneman Turo 3442 ställ en fråga nedan och andra användare kommer att svara dig


Lättnad Sonneman Manualer

Sonneman

Sonneman Fino Duo 3779 Bruksanvisning

3 April 2025
Sonneman

Sonneman Turo 3442 Bruksanvisning

3 April 2025
Sonneman

Sonneman QB 7520 Bruksanvisning

3 April 2025
Sonneman

Sonneman Turo 3441 Bruksanvisning

3 April 2025
Sonneman

Sonneman Lithe 3453 Bruksanvisning

3 April 2025
Sonneman

Sonneman Lithe 3466 Bruksanvisning

3 April 2025
Sonneman

Sonneman Suspenders SLS0157 Bruksanvisning

2 Januari 2025
Sonneman

Sonneman Suspenders SLS0164 Bruksanvisning

2 Januari 2025
Sonneman

Sonneman Stix Plus 2792.16 Bruksanvisning

26 September 2024
Sonneman

Sonneman Stix 2771.16 Bruksanvisning

26 September 2024

Lättnad Manualer

Nyaste Lättnad Manualer

NUVO

NUVO Clarksville 60/8064 Bruksanvisning

3 April 2025
Maxim

Maxim Meridian 25291OFNAB Bruksanvisning

3 April 2025
Trust

Trust Vybz GXT 905 Bruksanvisning

3 April 2025
Lexon

Lexon Mimi Bruksanvisning

3 April 2025
Altman

Altman PHX LVD 5000K Bruksanvisning

3 April 2025
Ikan

Ikan MB8 Bruksanvisning

3 April 2025
Ikan

Ikan MB4-2PT-KIT Bruksanvisning

3 April 2025
Kino Flo

Kino Flo FreeStyle T42 LED Bruksanvisning

3 April 2025
Kino Flo

Kino Flo FreeStyle T22 LED Bruksanvisning

3 April 2025
Kino Flo

Kino Flo FreeStyle T21 LED Bruksanvisning

3 April 2025