NAD MT 2 Bruksanvisning

NAD Audiostreamer MT 2

Läs nedan 📖 manual på svenska för NAD MT 2 (14 sidor) i kategorin Audiostreamer. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/14

MT2

Media Tuner

ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Owner’s Manual

SAVE THESE INSTRUCTIONS FOR LATER USE.

FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE AUDIO

EQUIPMENT.

1 Read instructions - All the safety and operating instructions should be read

before the product is operated.

2 Retain instructions - The safety and operating instructions should be retained

for future reference.

3 Heed Warnings - All warnings on the product and in the operating instructions

should be adhered to.

4 Follow Instructions - All operating and use instructions should be followed.

5 Cleaning - Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Clean only with a dry cloth.

6 Attachments - Do not use attachments not recommended by the product

manufacturer as they may cause hazards.

7 Water and Moisture - Do not use this product near water-for example, near a

bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a

swimming pool; and the like.

8 Accessories - Do not place this product on an unstable cart, stand, tripod,

bracket, or table. The product may fall, causing serious injury to a child or adult,

and serious damage to the product. Use only with a cart, stand, tripod, bracket,

or table recommended by the manufacturer, or sold with the product. Any

mounting of the product should follow the manufacturer’s instructions, and

should use a mounting accessory recommended by the manufacturer.

9 A product and cart combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may cause the product

and cart combination to overturn.

10 Ventilation - Slots and openings in the cabinet are provided for ventilation and

to ensure reliable operation of the product and to protect it from overheating,

and these openings must not be blocked or covered. The openings should never

be blocked by placing the product on a bed, sofa, rug, or other similar surface.

This product should not be placed in a built-in installation such as a bookcase or

rack unless proper ventilation is provided or the manufacturer’s instructions have

been adhered to.

11 Power Sources - This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of power

supply to your home, consult your product dealer or local power company. The

primary method of isolating the amplier from the mains supply is to disconnect

the mains plug. Ensure that the mains plug remains accessible at all times. Unplug

the AC power cord from the AC outlet if the unit will not be used for several

months or more.

12 Grounding or Polarization - This product may be equipped with a polarized

alternating current line plug (a plug having one blade wider than the other). This

plug will t into the power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the plug. If the plug

should still fail to t, contact your electrician to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

13 Power Cord Protection - Power supply cords should be routed so that they

are not likely to be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

14 Outdoor Antenna Grounding - If an outside antenna or cable system is

connected to the product, be sure the antenna or cable system is grounded so

as to provide some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer’s attention to Section

820-40 of the NEC which provides guidelines for proper grounding and, in particular,

species that the cable ground shall be connected to the grounding system of the

building, as close to the point of cable entry as practical.

15 Lightning - For added protection for this product during a lightning storm, or

when it is left unattended and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system. This will prevent damage

to the product due to lightning and power line surges.

16 Power Lines - An outside antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits

as contact with them might be fatal.

17 Overloading - Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of re or electric shock.

18 Object and Liquid Entry - Never push objects of any kind into this product

through openings as they may touch dangerous voltage points or short-out parts

that could result in a re or electric shock. Never spill liquid of any kind on the

product.

WARNING: THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING

OR SPLASHING, AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

SHOULD NOT BE PLACED ON THE APPARATUS. AS WITH ANY ELECTRONIC

PRODUCTS, USE CARE NOT TO SPILL LIQUIDS INTO ANY PART OF THE

SYSTEM. LIQUIDS CAN CAUSE A FAILURE AND/OR A FIRE HAZARD.

19 Damage Requiring Service - Unplug this product from the wall outlet and refer

servicing to qualied service personnel under the following conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen into the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualied technician to

restore the product to its normal operation.

e) If the product has been dropped or damaged in any way.

f) when the product exhibits a distinct change in performance-this indicates a

need for service.

20 Replacement Parts - When replacement parts are required, be sure

the service technician has used replacement parts specified by the

manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other

hazards.

21 Safety Check - Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the product is in

proper operating condition.

22 Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling

only as recommended by the manufacturer.

23 Heat - The product should be situated away from heat sources such as radiators,

heat registers, stoves or other products (including ampliers) that produce heat.

24 Headphones - Excessive sound pressure form earphones and headphones can

cause hearing loss.

25 Battery Disposal - When disposing of used batteries, please comply with

governmental regulations or environmental public instruction’s rules that apply

in your country or area. Batteries (battery pack or batteries installed) must not be

exposed to excessive heat such as sunshine, re or the like.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Its operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

DÉCLARATION DE LA FCC

Cet appareil est conforme à la section 15 des réglementations de la FCC. Le

fonctionnement de l’appareil est sujet aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d’interférences néfastes, et

(2) cet appareil doit tolérer les interférences reçues, y compris celles qui risquent de

provoquer un fonctionnement indésirable.

IC STATEMENT

This device complies with Industry Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause

undesired operation of the device.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

DECLARATION DE L’IC

Cet appareil s’accorde avec Industrie Canada licence-exempte RSS standard. Le

fonctionnement de l’appareil est sujet aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d’interférences néfastes, et

(2) cet appareil doit tolérer les interférences reçues, y compris celles qui risquent de

provoquer un fonctionnement indésirable.

This equipment should be installed and operated with a minimum distance of 20cm

between the radiator and your body.

Under Industry Canada regulations, this radio transmitter may only operate using

an antenna of a type and maximum (or lesser) gain approved for the transmitter by

Industry Canada. To reduce potential radio interference to other users, the antenna

type and its gain should be so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful communication.

Conformément à la réglementation d’Industrie Canada, le présent émetteur radio

peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur)

approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques

de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le

type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente

(p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication

satisfaisante.

FCC NOTICE

This product has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This product generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this product does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN

EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE

PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE

PRODUCT’S ENCLOSURE THAT MAYBE OF SUFFICIENT MAGNITUDE TO

CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS

INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT

OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE APPLIANCE.

CAUTION

Changes or modications to this equipment not expressly approved by NAD

Electronics for compliance could void the user’s authority to operate this equipment.

CAUTION REGARDING PLACEMENT

To maintain proper ventilation, be sure to leave a space around the unit (from the

largest outer dimensions including projections) that is equal to or greater than shown

below.

Left and Right Panels: 10 cm

Rear Panel: 10 cm

Top Panel: 10 cm

NOTES ON ENVIRONMENTAL PROTECTION

At the end of its useful life, this product must not be disposed of with

regular household waste but must be returned to a collection point for

the recycling of electrical and electronic equipment. The symbol on the

product, user’s manual and packaging, point this out.

The materials can be reused in accordance with their markings.

Through re-use, recycling of raw materials or other forms of recycling

of old products, you are making an important contribution to the protection of our

environment. Your local administrative oce can advise you of the responsible waste

disposal point.

INFORMATION ABOUT COLLECTION AND DISPOSAL OF WASTE BATTERIES

(DIRECTIVE 2006/66/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL

OF EUROPEAN UNION) (FOR EUROPEAN CUSTOMERS ONLY)

Batteries bearing any of these symbols indicate that

they should be treated as “separate collection” and not

as municipal waste. It is encouraged that necessary

measures are implemented to maximize the separate

collection of waste batteries and to minimize the disposal

of batteries as mixed municipal waste.

End-users are exhorted not to dispose waste batteries

as unsorted municipal waste. In order to achieve a high

level of recycling waste batteries, discard waste batteries

separately and properly through an accessible collection

point in your vicinity. For more information about

collection and recycling of waste batteries, please contact your local municipality,

your waste disposal service or the point of sale where you purchased the items.

By ensuring compliance and conformance to proper disposal of waste batteries,

potential hazardous eects on human health is prevented and the negative impact of

batteries and waste batteries on the environment is minimized, thus contributing to

the protection, preservation and quality improvement of the environment.

RECORD YOUR MODEL NUMBER (NOW, WHILE YOU CAN SEE IT)

The model and serial number of your new MT2 are located on the back of the cabinet.

For your future convenience, we suggest that you record these numbers here:

Model no: ......................................

Serial no.: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

IMPORTANT SAFETY INSTRUCTIONS

NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited

ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Produktspecifikationer

Varumärke:	NAD
Kategori:	Audiostreamer
Modell:	MT 2
Färg på produkten:	Zilver
Vikt:	3460 g
Bredd:	396 mm
Djup:	285 mm
Höjd:	45 mm
Förpackningens bredd:	480 mm
Djuppackning:	170 mm
Förpackningshöjd:	350 mm
Användarmanual:	Ja
AC-adapterfrekvens:	50 - 60 Hz
AC-adapterns inspänning:	100 - 240 V
Blåtand:	Ja
Skärm diagonal:	17 "
Upplösning:	1440 x 900 Pixels
Pekskärm:	Nee
Original bildförhållande:	16:10
Processorfrekvens:	2.13 GHz
Processorfamilj:	Intel® Core™2 Duo
Processormodel:	P7450
Antal processorkärnor:	2
Wi-Fi-standarder:	802.11b, 802.11g
Vormfaktor:	Clamshell
Inkluderar operativsystem:	Windows Vista Home Premium
Typ av anslutningskontakt:	3,5 mm
Ethernet LAN:	Ja
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	Memory Stick (MS), MMC, MS PRO, SD, xD
Ljudsystem:	3D Sound Blaster Pro
Typiskt kontrastförhållande:	200:1
Processor litografi:	45 nm
Garantikort:	Ja
Inkluderar AC-adapter:	Ja
Ursprungsland:	China
Antal USB 2.0-portar:	4
VGA (D-Sub) port(ar):	1
Antal HDMI-portar:	1
Mikrofon, linjeingång:	Ja
DVI-port:	Nee
Antal Ethernet LAN (RJ-45)-portar:	1
Monteringsalternativ för kabellås:	Ja
Antal inbyggda högtalare:	2
Hörlursutgångar:	2
AC-adapter, ström:	90 W
Inkluderar nätsladd:	Ja
Inbyggd mikrofon:	Ja
Internminne:	4 GB
Förvarings media:	HDD
Batteritid/batteritid:	- uur
Internminnestyp:	DDR2-SDRAM
Hållbarhetscertifikat:	ENERGY STAR
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Förvaringstemperatur:	-20 - 60 °C
Intel® Wireless Display (Intel® WiDi):	Nee
Processoruttag:	Socket 478
Stepping:	M0
Systembuss:	- GT/s
Processor antal trådar:	2
Processorns driftlägen:	64-bit
Processorns cache:	3 MB
Tjunction:	90 °C
Busstyp:	FSB
Thermal Design Power (TDP):	25 W
Kodnamnsprocessor:	Penryn
Typ av processorcache:	L2
ECC stöds av processor:	Nee
Processorfabrikant:	Intel
Operativsystems arkitektur:	64-bit
Maximalt internminne:	8 GB
Total lagringskapacitet:	320 GB
Typ av optisk enhet:	DVD Super Multi DL
Inbyggd grafikadapter:	Nee
Separat grafikadapter:	Ja
Inbyggd grafikadaptermodell:	Niet beschikbaar
Fram kamera:	Ja
Numerisk knappsats:	Ja
Intel® My WiFi Technology (Intel® MWT):	Nee
Intel® Smart Response Technology:	Nee
Intel® Hyper Threading Technology (Intel® HT Technology):	Nee
Intel® Turbo Boost-teknik:	Nee
Intel® Quick Sync-videoteknik:	Nee
Intel® InTru™ 3D-teknik:	Nee
Intel® Clear Video HD-teknik (Intel® CVT HD):	Nee
Intel® Insider™:	Nee
Intel® Flex Memory Access:	Nee
Intel® AES nya instruktioner (Intel® AES-NI):	Nee
Förbättrad Intel SpeedStep-teknik:	Ja
Kör Disable Bit:	Ja
Termisk övervakningsteknik:	Nee
Intel® Enhanced Halt State:	Nee
Intel® Clear Video Technology för mobila internetenheter (Intel® CVT för MID):	Nee
Intel® VT-x med utökade sidtabeller (EPT):	Nee
Inbyggda alternativ tillgängliga:	Nee
Intel® 64:	Ja
Intel® Virtualization Technology for Directed I/O (VT-d):	Nee
Intel® Clear Video-teknik:	Nee
Intel® Virtualization Technology (VT-x):	Nee
Konfliktfri processor:	Nee
ARK ID-processor:	36734
Intel® Trusted Execution Technology:	Nee
Datanätverk:	Niet ondersteund
Intel® Anti-Theft Technology (Intel® AT):	Nee
Intel® Rapid Start-teknik:	Nee
Intel® Smart Connect-teknik:	Nee
Anslutning till basstation:	Ja
SmartCard-kortplats:	Nee
Förvaringsfuktighet:	5 - 65 procent
Diskret grafikadaptermodell:	NVIDIA® GeForce® 9600M GT
Pekdon:	Touchpad
Windows-tangenter:	Ja
Märke av högtalare:	Altec Lansing
Minneslayout:	2 x 2 GB
Minnesplatser:	2x SO-DIMM
Minnesformfaktor:	SO-DIMM
Tangentbord i full storlek:	Ja
Höjd, drift:	-15 - 3048 m
Höjd vid förvaring:	-15 - 12192 m
Grafikminne:	0.512 GB
Antalet installerade hårddiskar:	1
HDD kapacitet:	320 GB
HDD-gränssnitt:	SATA
HDD rotationshastighet:	5400 RPM
Antal IEEE 1394/Firewire-portar:	1
CPU-multiplikator (bus/kärnförhållande):	7.5
FSB-paritet:	Nee
Bussprocessor på framsidan:	1066 MHz
Bearbetar storleken:	107 mm²
Antal bearbetade transistorer:	410 M
Intel® efterfrågebaserad växling:	Nee
Typ av laddningsport:	DC-in ingang
Medföljande drivrutiner:	Ja
Typ CardBus PCMCIA-slot:	Nee
Processorserie:	Intel Core 2 Duo P7000 Series
ExpressCard-kortplats:	Ja
S/PDIF-utgång:	Nee
Intel® Dual Display Capable Technology:	Nee
Intel® FDI-teknik:	Nee
Intel® Rapid Storage Technology:	Nee
Intel® Fast Memory Access:	Nee
4G WiMAX:	Nee
Modem (RJ-11) port:	1
Automatisk kraftavkänning:	Ja
Fjärrkontroll ingår:	Ja
LightScribe:	Ja
Maximalt internminne (64-bitars):	8 GB
Antal eSATA-portar:	1
Microfoonaansluiting:	3,5 mm
Wifi:	Ja
Drifttemperatur (TT):	0 - 35 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent
Typ produkt:	Notebook
Batteriteknik:	Lithium-Ion (Li-Ion)
Antal battericeller:	8