Synco G1A1 Bruksanvisning

Synco mikrofon G1A1

Läs nedan 📖 manual på svenska för Synco G1A1 (2 sidor) i kategorin mikrofon. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone G1A1 User Manual
Caring For Your SYNCO Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians
if any malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Product Instruction
TX Transmitter
RX Receiver
① Type-C Charging Port / Digital
Output
② On/ O󽗈 Button (Mono / Stereo /
Protected Channel)
③ 3.5mm TRS Output
④ 3.5mm Monitoring Port
① External Mic Input
② Type-C Charging Port
③ On/ O󽗈 Button
④ Built-in Mic
⑤ Power Indicator
⑥ Paring Indicator
⑦ Noise Reduction
⑧ Gain Adjustment of TX
⑨ Magnet Pocket Clip
⑩ Contacts
⑤ Power Indicator
⑥ Paring Indicator
⑦ Gain Adjustment of TX A
⑧ Gain Adjustment of TX B
⑨ Magnet Pocket Clip
⑩ Contacts
Indicator - TX
Indicator - RX
Unpaired
Unpaired
Blue Slow Flashes
Blue Slow Flashes
Paired ( with Mute & Noise
Reduction o󽗈 )
Protection Channel Mode
( R channel with less than 6dB)
Blue Keeps on
Blue & Red Both on
Pairing
Indicator
Pairing
Indicator
Power
Indicator
Power
Indicator
Mute on
Paired ( Mono Channel )
Red Keeps on
Blue Keeps on
Noise Reduction on
Stereo Mode
Blue & Red Both on
Red Keeps on
Charging ( Turns o󽗈 when fully
charged )
Charging ( Turns o󽗈 when fully
charged )
Green Keeps on
Green Keeps on
Warning of low battery
Warning of low battery
Green Flashes
Green Flashes
1. Power On/ O󽗈
Power On
The TX and RX automatically turn on when long press the power button
for 3 seconds, and the blue status indicator light up.
Power O󽗈
The TX and RX automatically turn o󽗈 when long press the power button
for 3 seconds, and the red status indicator light o󽗈.
2. Pairing
Automatic Pairing
Automatically pairing after the TX/RX turns on.
Manual Pairing
(1) Long press the power button for 8 seconds while the TX is powered o󽗈
Operations
until the blue pairing indicator 󽗊ashes.
(2) Long press the power button for 8 seconds while the RX is powered o󽗈
until the blue /red/ green pairing indicators 󽗊ashes.
(3) The blue light keeps on when the TX successfully paired. ( And the red,
green and blue pairing indicators on the RX 󽗊ash for about 1 minute , and
the blue light keeps on when exit the pairing state).
3. Channel output connection
① 3.5mm OUT output
The receiver outputs the audio signal to the recording device via either a
3.5mm TRRS phone cable or a 3.5mm TRS camera cable. Please use the
appropriate cable according to your device.
( When using an external microphone, please insert it correctly Note:
into the microphone input jack. Only TRS interface microphones are
supported.)
Package List
RX Receiver x1 TX Transmitter x1 Carring Box x1
2-in-1 Charging Cable x1
External Lav Mic (With Wind Mu󽗈) x1
3.5mm TRRS Phone Cable x1
3.5mm TRS Camera Cable x1
Mic Windshield
x1
Magnet x1
User Manual
X1
Apple Adapter (With MFI Certi󽗉cation)
3.5mm TRRS Phone Cable
3.5mm TRS Camera Cable
② Type-C port digital output
The receiver Type-C port has a digital output function, which can directly
use the Type-C to Type-C cable to output mobile phones or computers
and other devices.
( When connecting the computer, enter the sound Settings and Note:
set the input microphone to SYNCO G1 Pro to use G1 recording; Set the
output speaker to SYNCO G1 Pro to use real-time ear return in the receiver
listening interface.)
4. Real-time monitoring
The 3.5mm monitoring port of the receiver supports digital monitoring,
which can simultaneously monitor the sound source of the transmitter
and the input sound source of the device.
3.5mm Monitoring Jack
Headphone Impedance: under 100 Ω
5. Volume Control
① Press the power button on the TX to turn on/o󽗈 the mute. When mute
is on, the red pairing indicator on the TX keeps on.
② Short press the gain adjustment button of the TX to adjust the volume
for 4 levels.
③ Short press the gain adjustment of A/B TX buttons on the RX to adjust
the volume of A/B TX.
6. Noise Reduction
Short press the noise reduction button on the TX to turn on/o󽗈 the
noise reduction function. When the noise reduction on, the red and blue
indicator light on the TX status light up at the same time.
7. Switch the Channel Mode
Short press the power button on the RX to switch the mono/stereo/
protected channel mode.
Default mono mode. When switching to stereo mode, the red pairing
indicator light keeps on. When switching the protection channel mode,
the blue&red paring indicator lights light on at the same time.
8. Charging
Connect the charging cable through Type-C port of TX and RX，and fully
charged in about 2 hours.
( The grey end of the 2-in-1 charging cable included in the package Note:
can be used for digital output. )
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to
contact us
via Email：support@syncoaudio.com
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)
Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue, Liwan
District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following
its operation speci󽗉cation
Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking
Modi󽗉cations to a product by its user or a third party without prior
written consent of SYNCO, e.g. replacement of element or circuit, label
alteration
The code on product is inconsistent with that of warranty certi󽗉cate, or
the code on the product or warranty certi󽗉cate is altered or torn o󽗈
All consumable accessory attached to a product, like cable, wind mu󽗈,
battery
Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certi󽗉cate as proof of
purchase. If any of these documents is missing, only sales return or
chargeable service will be provided.
If the SYNCO product is out of the warranty coverage, the service and
the parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of
quality defect(s) found in the product under normal use within 30 days
upon receipt of the product.
2. Original SYNCO products are entitled to limited warranty 12-month
service. The warranty period begins on the date of purchase of brand new,
unused products by the 󽗉rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or
defective part will be repaired or replaced without charge (service and
materials fee).
Warranty
Form Factor
Polar Pattern
Frequency Range
Sensitivity
Maximum SPL
Built-in/External Mic
Omnidirectional
50Hz-20KHz
-40dB (±3 dB, re 1V/Pa at 1KHz)
120dB SPL (at 1KHz)
Microphone
Speci󽗉cations
Wireless Transmission
RF Frequency Band
Working Distance
Mounting
Audio Input
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Dimensions
Material
Weight
Wireless Transmission
RF Frequency Band
Working Distance
Latency
Mounting
Number of Audio Channels
Audio Output
Gain
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
656ft/200m (LOS area),
164ft/50m (NLOS area)
Pocket Clip
3.5 mm TRS Mic Input
5V 1A
Built-in Lithium Battery, 400mAh
2H
8H
52*42*16mm
ABS
35g
Digital 2.4GHz
2400-2483.5MHz
656ft/200m (LOS area),
164ft/50m (NLOS area)
20ms
Pocket Clip
2
3.5 mm TRS Mic Output
3.5 mm TRS Headphone Output
Type-C Output
1~30dB
5V 1A
Built-in Lithium Battery, 400mAh
2H
8H
52*42*16mm
ABS
35g
TX Transmitter
RX Receiver9. Mic Windshield & Device Installation
10. Setting The Recording Level Correctly
Camera devices generally have poor-quality, noisy preamps. In order to
get the cleanest signals possible, it is highly recommended that you set
the recording level on your camera quite low, 1/2 or 1/3 of it.
G1 provides variable gain control, allowing you to tailor your levels to just
about environment and recording device.
Adjust the recording level of inbuilt mics for SONY Camera
(Take A7S Ⅱ for example)
Adjust the recording level of inbuilt mics for Canon Camera
(Take EOS 5D Mark Ⅳ for example)
Adjust the recording level of inbuilt mics for Panasonic Camera
(Take LUMIX GH5 for example)

Produktspecifikationer

Varumärke: Synco
Kategori: mikrofon
Modell: G1A1

Behöver du hjälp?

Om du behöver hjälp med Synco G1A1 ställ en fråga nedan och andra användare kommer att svara dig


mikrofon Synco Manualer

Synco

Synco G2A1 Bruksanvisning

2 April 2025
Synco

Synco PX Bruksanvisning

2 April 2025
Synco

Synco MC3 LITE Bruksanvisning

2 April 2025
Synco

Synco G2A2 Bruksanvisning

2 April 2025
Synco

Synco G1A1 Bruksanvisning

2 April 2025
Synco

Synco G1 Pro Bruksanvisning

2 April 2025
Synco

Synco G2 Max Bruksanvisning

2 April 2025
Synco

Synco LAV-S6P Bruksanvisning

29 Mars 2025
Synco

Synco MA30 Bruksanvisning

27 Mars 2025
Synco

Synco P2S Bruksanvisning

27 Mars 2025

mikrofon Manualer

Nyaste mikrofon Manualer

Ambient

Ambient TinyMike ATM216 Bruksanvisning

9 April 2025
Ambient

Ambient Sound Fish ASF-1 MKII Bruksanvisning

9 April 2025
Ambient

Ambient ASF-G Bruksanvisning

9 April 2025
Ambient

Ambient Soundfish 2 MkII Bruksanvisning

9 April 2025
Ambient

Ambient UMP III Bruksanvisning

9 April 2025
Genesis

Genesis Radium 400 G2 Bruksanvisning

8 April 2025
Comica

Comica VP3 Bruksanvisning

2 April 2025
Atlas Sound

Atlas Sound MWHHM Bruksanvisning

2 April 2025
Sennheiser

Sennheiser MD 42 Bruksanvisning

1 April 2025
Samson

Samson Concert XD2 Bruksanvisning

30 Mars 2025