Techly I-WL-REPEATER2 Bruksanvisning

Techly Router I-WL-REPEATER2

Läs nedan 📖 manual på svenska för Techly I-WL-REPEATER2 (1 sidor) i kategorin Router. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

How Connect to Wireless-N Mini Router

You can configure the Wireless-N Mini Router by connecting it with your

computer/laptop with enclosed RJ45 cable or wirelessly.

A1. Plug the Wireless-N Mini Router to a wall socket.

A2. Click on the network icon ( or )

on the right bottom of your desktop. You will

find the signal from the . Click onWireless-N

‘ ’ then wait for a few seconds.Connect

A3. Open web browser and type

http://192.168.10.253 in the browser's

address box. This number is the default

IP address for this device.

Note: Please check whether the Wireless-N Mini Router accord with factory

default settings once you can’t download

If you are still not sure what reasons, you can reset the Wireless-N Mini

Router, just need to press the button for seconds, then try again.reset 10

http://192.168.10.253

Wireless-N Mini Router

01 Wireless-N Mini Router

02 Wireless-N Mini Router

Open Source Code

This product includes software codes developed by third parties. These

software codes are subject to either the GNU General Public License (GPL),

Version 2, June 1991 or the GNU Lesser General Public License (LGPL),

Version 2.1, February 1999. You can copy, distribute, and/or modify in

accordance with the terms and conditions of GPL or LGPL.

The source code should be complete, if you think our need to provide any

additional source code files under GNU General Public License (GPL), please

General Public License (GPL) . You are welcome to contact us local office to

get the corresponding software and licenses. Please inform us your contact

details and the product code. We will send you a CD with the software and

license for free.

Please refer to the GNU GPL Web site for further information.

http://www.gnu.org/licenses/licenses.en.html.

Wireless-N Mini Router

Router Mode: AP Mode:

Wireless- Mini RouterN

User Manual

REV 3.2

Introduction：

·Travel size design, ideal for home or travel use

·Supports WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions

Package Contents

Before you starting to use this router,

please check if there’s anything missing in

the package, and contact your dealer of

purchase to claim for missing items:

Getting Started

For a typical wireless setup at home (as shown above),

Please do the following:

1. You will need broadband Internet access (a ADSL, Cable Modem line into

your home or office).

2. Consult with your ADSL or Cable Modem provider for proper installation of

the modem.

3. Connect the ADSL or Cable modem to the Wireless N Mini Router.

Plug the power plug of the Router in electrical wall socket.

4. Adding computers to the Wireless N Mini Router.

IMPORTANT NOTE

You can reset your WiFi Router to default setting by press

and hold the ‘RESET’ button inside the tiny hole

for 8 ~10 seconds.

You can use this solution if you forget your password.

A4.The login screen below will appear. Enter the “User Name” and

“Password” then click “ ” to login. The default User name is “ ” and OK admin

Password is “ ”.admin

A5.After logging in, you will see the web page below:

Configuring via Web Browser

After you successfully login, you can click the Wizard's menu to quickly

configure your Router.

Choose the Operation Mode you need, and then click .it

Choose your WAN Connection Type.

If is selected, the Router gets the IP address automatically from Dynamic IP

the DHCP server or the ISP. No configuration should be set and you can go

on with the wireless configuration.

If is selected, please enter the and ADSL Dial-up (PPPoE) User Name

Password from your ISP, These fields are case-sensitive.

Set the wireless parameter. It's recommended that you rename an SSID,

choose a and enter a .Security Mode Key

Click ‘ ’ button, It will restart. Save&Reboot

Wait for a few seconds your Wi-Fi Router is ready for use.

the " " of your wireless network.SSID

Auto (recommend)

Setup the wireless security and encryption to prevent from

unauthorized access and monitoring.

Supports 64/128-bit WEP, WPA, WPA2, WPA/WPA2

encryption methods.

the " " of your wireless network.Password

SSID

Channel

Security type

Security key

Mode

Router

Standard Wireless Router Mode This router connect to :

Internet by WAN port, and then other terminal devices can

connect to this router by wireless connection or connect to this

router’s LAN port by wired

Description

raditional wired router realize wireless function This router can :

connect to uplink router's LAN port by wired connection, user

terminal can connect to this router by wireless connection

Repeater

Extend wireless signal comprehensively This router can :

connect to uplink wireless router by wireless connection, user

terminal can connect to this router by wired or wireless

connection

WISP

Wireless used as WAN port This router can connect to uplink :

wireless router by wireless connection, at the same time,it can

extend wireless signal for other devices' connection

Set the wireless parameter. It's recommended that you rename an , SSID

choose a and enter a .Security Mode Key

the " " of your wireless network.SSID

Auto (recommend)

Setup the wireless security and encryption to prevent from

unauthorized access and monitoring.

Supports 64/128-bit WEP, WPA, WPA2, WPA/WPA2

encryption methods.

the " " of your wireless network.Password

SSID

Channel

Security type

Security key

Click ‘ ’ button, It will restart. Save&Reboot

Wait for a few seconds your Wi-Fi Router is ready for use.

Wireless-N Mini Router

Repeater Mode:

Select the of the target network and click .SSID Select

The target network's SSID will be automatically filled into the wireless setting

figure. Then enter the Password.

Click ‘ button, It will restart. Save&Reboot’

Wait for a few seconds your Wi-Fi Router is ready for use.

Wireless-N Mini Router

10 Wireless-N Mini Router

Wireless-N Mini Router

In this mode, all Ethernet ports are bridged together and the wireless client

will connect to ISP access point.

The target network's SSID will be automatically filled into the wireless setting

figure. Then enter the Password.

Click ‘Save&Reboot’ button, It will restart.

Wait for a few seconds your Wi-Fi Router is ready for use.

Change Management password

Default password of Wireless-N Mini Router is “ ”, and it’s displayed on admin

the login prompt when accessed from web browser. There’s a security risk if

you don’t change the default password, since everyone can see it. This is

very important when you have wireless function enabled.

To change password, please follow the following instructions:

Please click ‘ ’ menu on the web management interface, the Administrator

following message will be displayed on your web browser:

If you want to change password, fill in the and ,Username Password

Click ‘ ’ button, The WiFi Repeater will log off.Apply

The system software used by this router is called as ‘firmware’, just like any

applications on your computer, when you replace the old application with a

new one, your computer will be equipped with new function. You can also use

this firmware upgrade function to add new functions to your router, even fix

the bugs of this router.

The upper right corners please click ‘ ’, and then the following Firmware

message will be displayed on your web browser:

WISP Mode:

Select the of the target network and click .SSID Select

Firmware Upgrade

Click ‘ ’ button first; you’ll be prompted to provide the filename of Browse

firmware upgrade file. Please download the latest firmware file from our

website, and use it to upgrade your router.

After a firmware upgrade file is selected, click ‘ ‘ button, and the Upgrade

router will start firmware upgrade procedure automatically.

The procedure may take several minutes, please be patient.

NOTE: Never interrupt the upgrade procedure by closing the web browser or

physically disconnect your computer from router. If the firmware you uploaded

is corrupt, the firmware upgrade will fail, and you may have to return this

router to the dealer of purchase to ask for help. (Warranty voids if you

interrupted the upgrade procedure).

Wireless-N Mini Router

Factory Default and Settings Backup , Restore

You can backup all Setting of this router to a file, so you can make several

copied of router configuration for security reason.

To backup or restore router setting, please follow the following instructions:

Please click ‘ ’ located at the web management interface, Save/Reload setting

then the following message will be displayed on your web browser:

Save Settings

to File

Press ‘ ’ button, you can please save it as another Save…

filename for different versions, and keep it in a safe place.

Load Settings Press ‘ ’ to pick a previously-saved configuration Browse…

file from your computer, and then click ‘ ’. After Upload…

the configuration is uploaded, the router’s configuration will

be replaced by the file you just uploaded.

Reset Settings

Click this ‘ ‘ button to remove all Reset to Default Settings

settings

Wireless-N Mini Router

How to connect your computer/laptop with the

Wireless-N Mini Router

Adding a Wireless computers to the Wireless-N Mini Router

1. Log on to the computer.

2. Open Connect to a Network by

right-clicking the network icon (

or ) in the notification area.

3. Choose the wireless network from

the list that appears, and then

click .Connect

4. Type the network security key or

passphrase if you are asked to do

so, and then click . You'll see a OK

confirmation message when you

are connected to the network.

5. To confirm that you added the computer, do the following:

Open Network by clicking the button , and then clicking Start Control

Panel. In the search box, type network, and then, under Network and Sharing

Center, click You should see icons View network computers and devices.

for the computer you added and for the other computers and devices

that are part of the network.

Note : If you don't see icons in the Network folder, then network

discovery and file sharing might be turned off.

Wireless-N Mini Router

1. Log on to the computer.

2. Click the “ ” button (it should beStart

located at the lower-left corner of your

screen), then click “ ”. CControl Panel

“View Network Status and Tasks”, an

then click “Manage Network Connect

Right-click “ ”, theLocal Area Network

select “ ”. When the “Local AProperties

Connection Properties” window appea

select “Internet Protocol Version 4

(TCP/IPv4) Propertie” and then click “

3. Setting IP address manually: Type I

address is (192.168.10.x x is from 2 t

252 255.255.255), and Subnet mask is

Type the Router’s LAN IP address (the

default IP is 192.168.10.253) into the D

gateway field.

Adding a Wireless computers to the Wireless-N Mini Router with WPS

Button

1. Log on to the computer.

2. Press the button of the Wireless-N Mini Router directly for WPS

seconds.

3. Press the WPS button of the Wireless Adapter directly for seconds.

Click Finish to complete the WPS configuration. (Please check your

Wireless adapter Manual with WPS configuration)

4. You should see icons for the computer you added and for the other

computers and devices that are part of the network.

Adding a wired (Ethernet) computer to the Wireless-N Mini Router

1. Plug the Wireless-N Mini Router to a wall socket. Connect your computer /

laptop with the Wireless-N Mini Router with enclosed RJ45 Cable.

2. To confirm that you added the computer, do the following:

Open Network by clicking the button , and then clicking Control Start

Panel. In the search box, type , and then, under Network and network

Sharing Center, click . You should View network computers and devices

see icons for the computer you added and for the other computers and

devices that are part of the network.

For more information:

2 – 3

2 - 3

http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-to-

a-network

http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network

http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-

network

How to configure your computer/laptop with the

Network IP Address

The Wireless-N Mini Router is a combined wired/wireless network connection

device designed specifically for small business, office, and home office

networking requirements. It complies with the IEEE 802.11n standard. It

adopts MIMO as well as SST technologies. It also works well with other 11b/g

and 11n protocol wireless products. Create instant WiFi hotspots at any

location where you have Internet connection .

Main Features

·Complies with IEEE 802.11b/g/n standards

·Supports Router, Client, Bridge, Repeater, AP mode

·QoS function assures the quality of VoIP and multimedia streaming

·Wireless N speed up to 300Mbps and Backward compatible with 802.11b/g

products

·Compact and portable, powerful wireless signal as well

·1 x Wireless N Mini Router

·1 x Quick Installation Guide

·1 x RJ-45 Networking Cable

Setting up a Wireless Infrastructure Network

Produktspecifikationer

Varumärke:	Techly
Kategori:	Router
Modell:	I-WL-REPEATER2

Behöver du hjälp?

Om du behöver hjälp med Techly I-WL-REPEATER2 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Router Techly Manualer

Techly I-WL-REPEATER2 Bruksanvisning

5 September 2024

Router Manualer

Nyaste Router Manualer

Hamlet HHTSPT3GM21 Bruksanvisning

15 Januari 2025

Edimax D4G-7459AC Bruksanvisning

14 Januari 2025

Edimax D5G-8459 Bruksanvisning

14 Januari 2025

Eero Outdoor 7 Bruksanvisning

10 Januari 2025

Edimax 5G-8649AX Bruksanvisning

10 Januari 2025

Edimax 4G-7449AC Bruksanvisning

10 Januari 2025

TP Link TL-R4199G Bruksanvisning

8 Januari 2025

Trendnet TEW-830MDR Bruksanvisning

8 Januari 2025

Netgear WAC104 Bruksanvisning

8 Januari 2025

TP Link Deco X1500-4G Bruksanvisning

7 Januari 2025