Westinghouse 6401235 Bruksanvisning

Westinghouse Lampa 6401235

Läs nedan 📖 manual på svenska för Westinghouse 6401235 (1 sidor) i kategorin Lampa. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

Installation and Safety Instructions

Warning: Electrical shock can result in serious injury.

Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read

all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or

ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not

install fixture. Return to place of purchase.

If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service

agent or a similar qualified person in order to avoid a hazard.

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

For indoor use only.

ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHTING FIXTURE

Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty

and service. For questions and comments, please visit www.westinghouselighting.eu/contact-us and www.

westinghouselighting.de/contact-us

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see

figure 1).

MOUNTING AND WIRING INSTRUCTIONS

NOTE: Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this

fixture.

1. Place fixture pan (A) flush against ceiling at desired mounting location. Using outside fixture pan key slot hole

(D) as a guide, make where pilot holes are to be drilled.

2. Drill 4 - 1/8 inch holes at each pencil mark then insert wall anchors (H) by gentlly tapping with a hammer.

3. Thread mounting screws (C) into the anchors approximately ¼ inch (for drywall ceiling).

4. Make an electrical connection by loosening the terminal screws on the terminal block (M) and inserting the

live, neutral and ground terminals.

5. Tighten terminal screws. Make sure there are no stray wires.

6. Raise fixture pan (A) to ceiling allowing mounting screws (C) to protrude through key slots (D) in fixture pan

(A) (see fig.1)

7. Rotate fixture pan (A) clockwise until mounting screws (C) lock into narrow portion of key slots (D). Secure

into place with mounting screws (C).

8. Final assembly - Secure the lens (E) and ring (F) to fixture pan (A) using for cap nuts (G).

CLEANING AND CARE

To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can discolor the finish of

fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

NOTE FOR FIXTURES THAT ARE SOLID BRASS:

Your hand-crafted, solid brass lighting fixture has been coated with a durable, baked-on acrylic lacquer which gives

maximum protection against the weather. However, in time the brightness of the brass will tarnish, giving way to an

authentic old-world brass finish. To keep your solid brass fixture looking new for years to come, regularly apply a good

quality, non-abrasive car wax to all metal surfaces, giving the fixture an extra protective covering.

Meaning of crossed-out wheeled dustbin:

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local

government for information regarding the collection systems available.

If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get

into the food chain, damaging your health and well-being.

When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposal

at least free of charge.

Appliance specifications - TECHNICAL CHARACTERISTICS

Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A.

www.westinghouselighting.com

, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF

are trademarks of Westinghouse Electric Corporation.

Used under license by Westinghouse Lighting.

Made in China

W-606

052818

*NOT SUPPLIED

FIGURE 1.

Rated voltage 220-240V~

Rated frequency 50Hz

Rated wattage Integrated LED Max. 25W

Protection class CLASS I

IP number IP20

Ambient temperature 40

Produktspecifikationer

Varumärke:	Westinghouse
Kategori:	Lampa
Modell:	6401235
Färg på produkten:	Black, Graphite
Monteringsmetod:	Bureau
Maximal viktkapacitet:	9 kg
Rotationsvinkel:	180 °
Kompatibilitet med monteringsgränssnitt (min):	75 x 75 mm
Kompatibilitet med monteringsgränssnitt (max):	100 x 100 mm
Antal skärmar som stöds:	1
Förbättrad kabelhantering:	Ja
Tiltvinkelområde:	-40 - 40 °
Maximal skärmstorlek:	24 "
Minsta skärmstorlek:	- "